BEXEC 2010 and Quantum SuperLoader3 inventory problem
- 14 years ago
Just to summarize what had happened here is that you had filled all the slots in the library. But there was another tape stuck in the Tape drive.
Durin Inventory every tape is moved from slots to the tape drive and back to the same slot. In this case as the tape drive already had a tape stuck in there, so other tape could not be moved. And there was no empty slot for the tape to be moved from Tape drive to the slot.
When you removed the tape from slot 1 and ran the Inventory, it moved the tape which was stuck up in the tape drive to that slot 1. So now slot 1 is Filled and tape drive is empty so that other tapes and go in and go out of the tape drive.
So instead of 17 you should be using only 16 tapes in the library at a time.
Hope this clears your doubt.....!!!
Thanks,
-Sush...