Forum Discussion

nerdnut's avatar
nerdnut
15 years ago

Blue Screen on Windows 2008 R2 with BE 2010

I am having blue screens on some backup jobs using BE 2010 on 2008 R2 when trying to backup a large direct attach SCSI array on my backup server, and also when trying to do full NDMP backups of our NetApp filers. Anyone else experienced these, and / or have thoughts on troubleshooting?

Hardware is a Dell PE 2950 , tape library is a Dell Powervault 124T attached to an LSI U320 PCI-E card, and a Promise V-Trak 310 series attached to an Atto UL5D card. Done all firmware and driver updates on the PE 2950, 124T, drivers for the Atto and LSI, haven't checked firmware for the LSI card or Promise.

thx :)
monte
2010
Backup and Recovery
Backup Exec
Dell
Windows

8 Replies

Sort By
  • DanielCapilla's avatar
    DanielCapilla
    Level 4
    15 years ago
    Hi,

    we have the same issue.

    1x Windows Server 2008 R2 (Management-Server, HP ML330)
    1x Windows Server 2008 R2 (HyperV host, 4 guests, HP ML 350)

    Plain Windows Installations.
    HyperV host is domain-member, mgmt-server is domain-member.
    Fresh installation of BE 2010 on mgmt-server and fresh installation on HyperV-server.
    Installation of 3 Hotfixes on mgmt-server and installing RA again on HyperV-Server:
    http://entsupport.symantec.com/umi/V-373-00003
    http://entsupport.symantec.com/umi/V-373-00006
    http://entsupport.symantec.com/umi/V-373-00005

    Reboot. 

    Simple backup-job - just backing up 1 guest remote.
    When the backup starts, it hangs during "snapshot..." and hyper-v server reboots :-(

    help is very aprecciated.

    Daniel
  • DanielCapilla's avatar
    DanielCapilla
    Level 4
    15 years ago

    Thank you STeve O for your help, but the Hotfix does not work nor install on 2008 R2.

    The Eventlog says (german):
    Der Computer wurde nach einem schwerwiegenden Fehler neu gestartet. Der Fehlercode war: 0x000000ca (0x0000000000000002, 0xfffffa80175f5bc0, 0x0000000000000000, 0x0000000000000000). Ein volles Abbild wurde gespeichert in: C:\Windows\MEMORY.DMP. Berichts-ID: 030810-13977-01

    Source: Fehlercode
    Ereignis-ID: 1001


    The bluescreen says something about "Plug and Play detected an error most likely caused by a faulty driver"
     
    I'm doing now some research in that direction.

    Further help would be appreciated.

    Regards
    Daniel

  • DanielCapilla's avatar
    DanielCapilla
    Level 4
    15 years ago
    a new status:

    The HV 2008 R2 Host who gets the bluescren while backing up via BE2010 Remoteagent just gets teh Bluescreen, while -> System Recovery 2010 - is also installed.

    We liked to use both products, but it seems, that those Symantec products don't like each other.

    When deinstalling System Recovery 2010 the backup works fine ... but that's no kind of solution.

    Regards
    Daniel

  • JStellato's avatar
    JStellato
    Level 3
    15 years ago

    I have the same issue on an Intel System.  On a fresh install of Server 2008 R2 x64 which IS a Hyper-V host with 1 VM, which also has the BE 2010 installed (latest 9.0.1.36527)

    The hyper-v VM backs up perfectly, the host gets a bsod and reboots, before it ever starts writing the .v2i file.  Is there anyone working on fixing this, or a fix available?

    Joe
  • DanielCapilla's avatar
    DanielCapilla
    Level 4
    15 years ago
    Last week I received Mail from a Symantec technican.
    He told me, that this issue is acknowledged but there is no fix for it yet. :-(

    It seems so, we bought again some kind of "banana-software" that is not ready to release but yet released.

    Regards
    Daniel
  • Housi_Riesen's avatar
    Housi_Riesen
    14 years ago
    Hi Daniel,

    I've got an Similar Problem, did you recieve more Information about a Hotfix?


    Best Regards
    Hans Riesen