e00084c7 read/write error

If it's only one tape, I suggest to replace the tape with a new one.

If you have run a couple of cleaning runs on the drive and continue to get this error, then the drive may be going bad

Download the manufacturer's test utility (Like HP's LTT - Library Test Tool) and run a few passes.  Make sure the BE services are shut down and that you select the write test

Hello there!

                         I will recommend you to try the job with a different tape, if still having the same issue, run the tracer.exe BE utility, upload the files, so that we can determine if it's a hardware related issue. 

C:/program files/symantec/Backup exec/tracer.exe

Make sure you save it as a ".txt" file, so that I am able to read it. 

Thanks! 

Sole. 

How can i run cleaning on the tape?

Thanks, 

If you are using a stand-alone tape drive, then you just put the cleaning tape into the drive.  It will be ejected after it cleaned the tape drive which should take a minute or two.

If you are using a tape library, then you put the cleaning tape into a slot and then right-click on the slot and designate that as a cleaning slot.  You then right-click on the library and select clean.

However, as Ken said, if your tape drive repeatedly asked to be cleaned despite being cleaned, then it is faulty and needs to be replaced.

Aloha,

Thanks for the reply reply. If you say cleaning tape this is just a LTO data cartridge or a special tape use for cleaning only? What we have here are 5 LTO2 tapes and a tape drive. Also, why is only 1 tape is having this error and the rest is ok?

Thanks, 

Aloha!

Thanks for the time spent for my query :)

Hades,