Creating an application under VCs

You also must use at least one of the following attributes:
MonitorProgram
MonitorProccesses
PIDFiles

If you application doesn't have any processes, then you can just create and remove a file in StartProgram and StopProgram and check file exists in MonitorProgram

Exit values for StartProgram and StopProgram should be 0 and:

MonitorProgram can return the following VCSAgResState values:

OFFLINE value is 100 or 1; ONLINE values range from 101 to 110 or

0 (depending on the confidence level); 110 equals confidence level of

100%. Any other value = UNKNOWN.

You can look at using Process Agent as well

https://sort.symantec.com/public/documents/sfha/6.1/solaris/productguides/html/vcs_bundled_agents/ch05s05.htm

You can look at entry points for process agent here

https://sort.symantec.com/public/documents/sfha/6.1/solaris/productguides/html/vcs_bundled_agents/ch05s05s04.htm

G

Also, please check that the start and stop scripts return after starting/stopping the application. If that is not done, then the online and offline operations of the application resource will timeout.

And as mentioned by Mike, specify atleast one of the 3 monitoring attributes: MonitorProgram, MonitorProcesses or PidFiles, depending on what is convenient for your application.

Process Agent may be a better choice for your requirement.

Please locate the Documentation for your OS and SF/HA combination on https://sort.symantec.com/documents and download the Bundled Agent Guide for detailed config info for Process and Application agents.