Forum Discussion

Anish's avatar
Anish
Level 4
13 years ago

Error During VCS configuration

Hi All,

 

I have setup VCS Lab on my own laptop Environment is as follows:

 

Veritas Workstation 8.0

2 x VMS with 1.5 GB RAM each, Solaris 10 U9 64-bit OS. With All pre-requisites like 3 NICS.

1 for Public interface

2 for Private interface i.e. for I/O fencing.

Authentication without root password.

for shared Storage I have created one more VM with Solaris 10 OS and few disks are shared using iscsi protocol to two node cluster.

I am able to install x_86 VCS 5.1 on this two node cluster sucessfully.

But when I am trying to configure cluster using ./installvcs -configure I observed following error :

 

Veritas Cluster Server 5.1 SP1 Configure Program                                                            
                                                                                prod dev                                                                               

     1)  Configure heartbeat links using LLT over Ethernet
     2)  Configure heartbeat links using LLT over UDP
     3)  Automatically detect configuration for LLT over Ethernet
     b)  Back to previous menu

How would you like to configure heartbeat links? [1-3,b,q,?] (3) 1

    Discovering NICs on prod ............................................................................................ Discovered e1000g0 e1000g1 e1000g2 e1000g3

Enter the NIC for the first private heartbeat link on prod: [b,q,?] (e1000g2)
Would you like to configure a second private heartbeat link? [y,n,q,b,?] (n) y
Enter the NIC for the second private heartbeat link on prod: [b,q,?] (e1000g3)
Would you like to configure a third private heartbeat link? [y,n,q,b,?] (n)
Do you want to configure an additional low-priority heartbeat link? [y,n,q,b,?] (n)
Are you using the same NICs for private heartbeat links on all systems? [y,n,q,b,?] (y)
Can't use string ("VCS51") as a HASH ref while "strict refs" in use at ../scripts/CPIP/Prod/VCS51.pm line 3870, <STDIN> line 10.

I tried to google above problem but could not find the answer , if anybody encounter such error and resolved this pls help me to resolve.

For any further info. require pls reply.

 

Thanks & Regards

Anish

 

business continuity
Cluster Server
Configuring
Error messages
Installing
Tip-How to
  • mikebounds's avatar
    mikebounds
    13 years ago

    If you are configuring manually there there are a few more things you need to do:

    1. Create /etc/VRTSvcs/conf/sysname file containing hostname
    2. Check contents of /etc/sysconfig/vcs for line that says ONENODE= to make sure this says no
    3. You may need to copy types.cf file from /etc/VRTSvcs/conf to /etc/VRTSvcs/conf/config
    4. Create a main.cf file on one of the nodes in /etc/VRTSvcs/conf to /etc/VRTSvcs/conf/config as follows:
      include "types.cf"
      cluster rainbow (
      )
      system prod ()
      system dev ()
       
    5. Start LLT - I think path is - /etc/rc2.d/S70llt start (both nodes)
    6. Start GAB - I think path is - /etc/rc2.d/S92gab start
    7. Start VCS on the node you created main.cf - /opt/VRTSvcs/bin/hastart
    8. Start VCS on the other node /opt/VRTSvcs/bin/hastart
    9. Run  /opt/VRTSvcs/bin/hauser -add admin -priv Administrator

     

    Mike

17 Replies

Sort By
Show More
  • S_Herdejurgen's avatar
    S_Herdejurgen
    Level 4
    13 years ago

    Anish asked me to respond to this.  I would recommend manual configuration by intalling the product with './installvcs -installonly' and then creating the 3 files you need to get LLT and GAB working manually.  (It's easy :)

    /etc/llthosts:
    0 hosta
    1 hostb

    /etc/gabtab:
    /sbin/gabconfig -c -n2

    /etc/llttab:
    set-cluster 10
    set-node /etc/nodename
    set-timer peertrouble:400
    link nxge0 /dev/nxge:0 - ether - -
    link nxge4 /dev/nxge:4 - ether - -
    link-lowpri vnet0 /dev/vnet:0 - ether - -
    start
     

    You will need to change the network device names to match your configuration in the llttab file.

  • Kimberley's avatar
    Kimberley
    Level 6
    13 years ago

    Hi,

    I've escalated this to support to see if this is a known bug or if there is additional info they can provide for you. Will update when I hear back.

    Best,

    Kimberley

  • Anish's avatar
    Anish
    Level 4
    13 years ago

    Thanks Seann, As Suggested I will try to Configure VCS manually and post the result.

    Thanks Kimberley, I would like to hear on this problem.

  • mikebounds's avatar
    mikebounds
    Level 6
    13 years ago

    If you are configuring manually there there are a few more things you need to do:

    1. Create /etc/VRTSvcs/conf/sysname file containing hostname
    2. Check contents of /etc/sysconfig/vcs for line that says ONENODE= to make sure this says no
    3. You may need to copy types.cf file from /etc/VRTSvcs/conf to /etc/VRTSvcs/conf/config
    4. Create a main.cf file on one of the nodes in /etc/VRTSvcs/conf to /etc/VRTSvcs/conf/config as follows:
      include "types.cf"
      cluster rainbow (
      )
      system prod ()
      system dev ()
       
    5. Start LLT - I think path is - /etc/rc2.d/S70llt start (both nodes)
    6. Start GAB - I think path is - /etc/rc2.d/S92gab start
    7. Start VCS on the node you created main.cf - /opt/VRTSvcs/bin/hastart
    8. Start VCS on the other node /opt/VRTSvcs/bin/hastart
    9. Run  /opt/VRTSvcs/bin/hauser -add admin -priv Administrator

     

    Mike

  • Anish's avatar
    Anish
    Level 4
    13 years ago

    Hi All,

    Thanks for your responces, as suggested i tried to configure VCS manually

    Following steps are performed :

    on Dev node:

    bash-3.00# cat /etc/llttab

    set-node prod

    set-cluster 101

    link e1000g2 /dev/e1000g:2 - ether - -

    link e1000g3 /dev/e1000g:3 - ether - -

    bash-3.00# cat /etc/llthosts

    1 dev

    2 prod

    bash-3.00# cat /etc/VRTSvcs/conf/config/main.cf

    include "types.cf"

     

    cluster rainbow (

            )

     

    system dev (

            )

     

    system prod (

            )

     

    bash-3.00# cat /etc/gabtab

    /sbin/gabconfig -c -n2

    bash-3.00# cat /etc/VRTSvcs/conf/sysname

    prod

    on prod node:

    bash-3.00# cat /etc/llttab

    set-node dev

    set-cluster 101

    link e1000g2 /dev/e1000g:2 - ether - -

    link e1000g3 /dev/e1000g:3 - ether - -

    bash-3.00# cat /etc/llthosts

    1 dev

    2 prod

    bash-3.00# cat /etc/gabtab

    /sbin/gabconfig -c -n2

    bash-3.00# cat /etc/VRTSvcs/conf/config/main.cf

    include "types.cf"

    copied types.cf file from /etc/VRTSvcs/conf to /etc/VRTSvcs/conf/config

    bash-3.00# cat /etc/VRTSvcs/conf/sysname

    dev

    after doing this tried to start llt and gab on both nodes using command

    lltconfig -c

    and

    sh /etc/gabtab

    but did not sucessful

    so tried to start their SMF (i think in VCS6.0 they have removed /etc/rc2.d/S70llt and /etc/rc2.d/S92gab)

    svcadm enable svc:/system/llt:default

    svcadm enable svc:/system/gab:default

    but still services was going in maintenance after analyzing the logs i found following error messages :

    Feb 18 19:14:15 Executing start method ("/lib/svc/method/llt start") ]

    This script is not allowed to start LLT. LLT_START is not 1

    for this i changed value in following file:

    bash-3.00# cat /etc/default/llt

    #

    # This file is sourced :

    #       from /etc/init.d/llt            for Solaris < 2.10

    #       from /lib/svc/method/llt        for Solaris 2.10

    #

    # Set the two environment variables below as follows:

    #

    #       1 = start or stop llt

    #       0 = do not start or stop llt

    #

     

    LLT_START=1-----------> by default it was set to 0

    LLT_STOP=1-----------> by default it was set to 0

    same for gab

    bash-3.00# cat /etc/default/gab

    #

    # This file is sourced :

    #       from /etc/init.d/gab            for Solaris < 2.10

    #       from /lib/svc/method/gab        for Solaris 2.10

    #

    # Set the two environment variables below as follows:

    #

    #       1 = start or stop gab

    #       0 = do not start or stop gab

    #

    GAB_START=1-----------> by default it was set to 0

    GAB_STOP=1-----------> by default it was set to 0

    then my both services are up and running on both nodes :

    bash-3.00# svcs -a|grep llt

    online          9:07:25 svc:/system/llt:default

    bash-3.00# svcs -a|grep gab

    online          9:07:28 svc:/system/gab:default

    then tried to bring VCS services online

    but again it was going in to maintainace due to follwowing error :

    Feb 18 23:05:26 dev Had[510]: [ID 702911 daemon.notice] VCS ERROR V-16-1-10614 Cluster UUID is not configured or it is empty,  on system dev - VCS Stopping. Manually Re

    start VCS after configuring Cluster UUID.

    to configure run following command on both nodes:

    /opt/VRTSvcs/bin/uuidconfig.pl -clus -configure

    also changed following values in /etc/default/vcs file:

    VCS_START=1

    VCS_STOP=1

    now all my services are running but still i m getting following problem :

    my gab is working properly on both nodes but llt is not communicating other node

    output of gab is as following after starting cluster using hastart on both nodes:

    bash-3.00# hastart

    bash-3.00# gabconfig -a

    GAB Port Memberships

    ===============================================================

    Port a gen  12f3f02 membership ;1

    Port h gen  12f3f09 membership ;1

    bash-3.00# uname -n

    dev

    bash-3.00# hastart

    bash-3.00# hastatus -sum

     

    -- SYSTEM STATE

    -- System               State                Frozen

     

    A  dev                  UNKNOWN              0

    A  prod                 RUNNING              0

    bash-3.00# gabconfig -a

    GAB Port Memberships

    ===============================================================

    Port a gen  12f3f02 membership ; 2

    Port h gen  12f3f0b membership ; 2

    bash-3.00# uname -n

    prod

    but output of llt on dev node is :

    Port h gen  12f3f09 membership ;1

    bash-3.00# uname -n

    dev

    bash-3.00# lltstat -nl

    LLT node information:

        Node                 State    Links

       * 1 dev               OPEN        2

    LLT link information:

    link 0  e1000g2 on etherfp hipri

            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6

            txpkts 3514  txbytes 211939

            rxpkts 937  rxbytes 68662

            latehb 0  badcksum 0  errors 0

    link 1  e1000g3 on etherfp hipri

            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6

            txpkts 347  txbytes 24504

            rxpkts 281  rxbytes 19328

            latehb 0  badcksum 0  errors 0

    and on prod :

    bash-3.00# lltstat -nl

    LLT node information:

        Node                 State    Links

       * 2 prod              OPEN        2

    LLT link information:

    link 0  e1000g2 on etherfp hipri

            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6

            txpkts 3390  txbytes 180168

            rxpkts 713  rxbytes 52320

            latehb 0  badcksum 0  errors 0

    link 1  e1000g3 on etherfp hipri

            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6

            txpkts 444  txbytes 31270

            rxpkts 257  rxbytes 15827

            latehb 0  badcksum 0  errors 0

    whereas it should see each other.

    due to this may be i m getting output of hastatus -sum on prod:

    bash-3.00# hastatus -sum

     

    -- SYSTEM STATE

    -- System               State                Frozen

     

    A  dev                  UNKNOWN              0

    A  prod                 RUNNING              0

    bash-3.00# uname -n

    prod

    and on dev node output is :

    bash-3.00# hastatus -sum

     

    -- SYSTEM STATE

    -- System               State                Frozen

     

    A  dev                  RUNNING              0

    one more observation after starting cluster main.cf file on dev node is auto modified to

    bash-3.00# cat /etc/VRTSvcs/conf/config/main.cf

    include "types.cf"

     

    cluster vcs (

            )

     

    system dev (

            )

    whereas only include "types.cf" line was present and we have added actual configuration on prod node.

    in message file i can see following messages related to llt interfaces for other nodes:

    Feb 21 09:07:17 dev e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[3] : link up, 1000 Mbps, full duplex

    Feb 21 09:07:17 dev e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[2] : link up, 1000 Mbps, full duplex

    Feb 21 09:07:27 dev genunix: [ID 644314 kern.notice] GAB INFO V-15-1-20026 Port a[GAB_Control (refcount 2)] registration waiting for seed port membership

    Feb 21 09:07:41 dev syslog[542]: [ID 702911 daemon.notice] VCS INFO V-16-1-11240 Command Server: running with security OFF

    Feb 21 09:07:42 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-10619 'HAD' starting on: dev

    Feb 21 09:07:42 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-10620 Waiting for local cluster configuration status

    Feb 21 09:07:42 dev genunix: [ID 122464 kern.notice] LLT INFO V-14-1-10499 recvarpreq link 1 for node 2 addr change from 00:00:00:00:00:00 to 00:0C:29:E2:CE:CB

    Feb 21 09:07:42 dev genunix: [ID 122464 kern.notice] LLT INFO V-14-1-10499 recvarpreq link 0 for node 2 addr change from 00:00:00:00:00:00 to 00:0C:29:E2:CE:D5

    Feb 21 09:07:42 dev genunix: [ID 860062 kern.notice] LLT INFO V-14-1-10024 link 0 (e1000g2) node 2 active

    Feb 21 09:07:44 dev genunix: [ID 860062 kern.notice] LLT INFO V-14-1-10024 link 1 (e1000g3) node 2 active

    Feb 21 09:07:49 dev syslog[542]: [ID 702911 daemon.warning] WARNING V-365-1-1 This host is not entitled to run Veritas Storage Foundation/Veritas Cluster Server.

    Feb 21 09:07:49 dev As set forth in the End User License Agreement (EULA) you must complete one of the two options set forth below. To comply with this condition of the EULA and stop logging of this message, you have 56 days to either:

    Feb 21 09:07:49 dev - make this host managed by a Management Server (see http://go.symantec.com/sfhakeyless for details and free download), or

    Feb 21 09:07:49 dev - add a valid license key matching the functionality in use on this host using the command 'vxlicinst' and validate using the command 'vxkeyless set NONE'.

    Feb 21 09:07:49 dev genunix: [ID 272960 kern.notice] GAB INFO V-15-1-20036 Port a[GAB_Control (refcount 1)] gen  12f3f01 membership ;12

    Feb 21 09:08:04 dev genunix: [ID 773945 kern.info]      UltraDMA mode 2 selected

    Feb 21 09:08:04 dev genunix: [ID 935449 kern.info]      ATA DMA off: disabled.  Control with "atapi-cd-dma-enabled" property

    Feb 21 09:08:04 dev genunix: [ID 882269 kern.info]      PIO mode 4 selected

    Feb 21 09:08:04 dev genunix: [ID 935449 kern.info]      ATA DMA off: disabled.  Control with "atapi-cd-dma-enabled" property

    Feb 21 09:08:04 dev genunix: [ID 882269 kern.info]      PIO mode 4 selected

    Feb 21 09:08:04 dev genunix: [ID 935449 kern.info]      ATA DMA off: disabled.  Control with "atapi-cd-dma-enabled" property

    Feb 21 09:08:04 dev genunix: [ID 882269 kern.info]      PIO mode 4 selected

    Feb 21 09:08:04 dev genunix: [ID 935449 kern.info]      ATA DMA off: disabled.  Control with "atapi-cd-dma-enabled" property

    Feb 21 09:08:04 dev genunix: [ID 882269 kern.info]      PIO mode 4 selected

    Feb 21 09:08:13 dev svc.startd[7]: [ID 122153 daemon.warning] svc:/application/stosreg:default: Method or service exit timed out.  Killing contract 95.

    Feb 21 09:08:13 dev svc.startd[7]: [ID 636263 daemon.warning] svc:/application/stosreg:default: Method "/lib/svc/method/svc-stosreg" failed due to signal KILL.

    Feb 21 09:08:14 dev sendmail[584]: [ID 702911 mail.crit] My unqualified host name (dev) unknown; sleeping for retry

    Feb 21 09:08:17 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-10625 Local cluster configuration valid

    Feb 21 09:08:17 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-11034 Registering for cluster membership

    Feb 21 09:08:17 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-11035 Waiting for cluster membership

    Feb 21 09:08:22 dev genunix: [ID 272960 kern.notice] GAB INFO V-15-1-20036 Port h[GAB_USER_CLIENT (refcount 0)] gen  12f3f04 membership ;12

    Feb 21 09:08:22 dev Had[497]: [ID 702911 daemon.notice] VCS INFO V-16-1-10077 Received new cluster membership

    Feb 21 09:08:23 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-10086 System dev (Node '1') is in Regular Membership - Membership: 0x6

    Feb 21 09:08:23 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-10086 System  (Node '2') is in Regular Membership - Membership: 0x6

    Feb 21 09:08:26 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-10073 Building from local configuration

    Feb 21 09:08:26 dev genunix: [ID 577146 kern.notice] NOTICE: VXFEN INFO V-11-1-VxFEN unloaded

    Feb 21 09:08:27 dev genunix: [ID 140958 kern.notice] LLT INFO V-14-1-10205 link 1 (e1000g3) node 2 in trouble

    Feb 21 09:08:27 dev rootnex: [ID 349649 kern.info] xsvc0 at root

    Feb 21 09:08:27 dev genunix: [ID 936769 kern.info] xsvc0 is /xsvc

    Feb 21 09:08:31 dev pseudo: [ID 129642 kern.info] pseudo-device: devinfo0

    Feb 21 09:08:31 dev genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0

    Feb 21 09:08:31 dev unix: [ID 954099 kern.info] NOTICE: IRQ19 is being shared by drivers with different interrupt levels.

    Feb 21 09:08:31 dev This may result in reduced system performance.

    Feb 21 09:08:31 dev pci_pci: [ID 370704 kern.info] PCI-device: pci1274,1371@1, audioens0

    Feb 21 09:08:31 dev genunix: [ID 936769 kern.info] audioens0 is /pci@0,0/pci15ad,790@11/pci1274,1371@1

    Feb 21 09:08:33 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 8 sec (281)

    Feb 21 09:08:34 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 9 sec (281)

    Feb 21 09:08:35 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 10 sec (281)

    Feb 21 09:08:36 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 11 sec (281)

    Feb 21 09:08:37 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 12 sec (281)

    Feb 21 09:08:38 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 13 sec (281)

    Feb 21 09:08:39 dev genunix: [ID 592107 kern.notice] LLT INFO V-14-1-10510 sent hbreq (NULL) on link 1 (e1000g3) node 2. 4 more to go.

    Feb 21 09:08:39 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 14 sec (281)

    Feb 21 09:08:39 dev genunix: [ID 592107 kern.notice] LLT INFO V-14-1-10510 sent hbreq (NULL) on link 1 (e1000g3) node 2. 3 more to go.

    Feb 21 09:08:40 dev genunix: [ID 592107 kern.notice] LLT INFO V-14-1-10510 sent hbreq (NULL) on link 1 (e1000g3) node 2. 2 more to go.

    Feb 21 09:08:40 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 1 (e1000g3) node 2 inactive 15 sec (281)

    Feb 21 09:08:40 dev genunix: [ID 592107 kern.notice] LLT INFO V-14-1-10510 sent hbreq (NULL) on link 1 (e1000g3) node 2. 1 more to go.

    Feb 21 09:08:41 dev genunix: [ID 592107 kern.notice] LLT INFO V-14-1-10510 sent hbreq (NULL) on link 1 (e1000g3) node 2. 0 more to go.

    Feb 21 09:08:41 dev genunix: [ID 205468 kern.notice] LLT INFO V-14-1-10509 link 1 (e1000g3) node 2 expired

    Feb 21 09:08:41 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-10066 Entering RUNNING state

    Feb 21 09:08:47 dev genunix: [ID 140958 kern.notice] LLT INFO V-14-1-10205 link 0 (e1000g2) node 2 in trouble

    Feb 21 09:08:49 dev Had[497]: [ID 702911 daemon.notice] VCS NOTICE V-16-1-50311 VCS Engine: running with security OFF

    Feb 21 09:08:54 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 0 (e1000g2) node 2 inactive 8 sec (410)

    Feb 21 09:08:55 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 0 (e1000g2) node 2 inactive 10 sec (411)

    Feb 21 09:08:56 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 0 (e1000g2) node 2 inactive 11 sec (412)

    Feb 21 09:08:51 dev Had[497]: [ID 702911 daemon.alert] VCS WARNING V-16-1-40184 HAD Self Check: Excessive delay in the HAD heartbeat to GAB

    Feb 21 09:08:57 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 0 (e1000g2) node 2 inactive 12 sec (412)

    Feb 21 09:08:58 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 0 (e1000g2) node 2 inactive 13 sec (413)

    Feb 21 09:08:59 dev genunix: [ID 487101 kern.notice] LLT INFO V-14-1-10032 link 0 (e1000g2) node 2 inactive 14 sec (413)

    same messages are observed on other node where as output of dladm show-dev is as follows:

    bash-3.00# uname -n

    prod

    bash-3.00# dladm show-dev

    e1000g0         link: up        speed: 1000  Mbps       duplex: full

    e1000g1         link: up        speed: 1000  Mbps       duplex: full

    e1000g2         link: up        speed: 1000  Mbps       duplex: full----link used for llt

    e1000g3         link: up        speed: 1000  Mbps       duplex: full---link used for llt

     

    bash-3.00# uname -n

    dev

    bash-3.00# dladm show-dev

    e1000g0         link: up        speed: 1000  Mbps       duplex: full

    e1000g1         link: up        speed: 1000  Mbps       duplex: full

    e1000g2         link: up        speed: 1000  Mbps       duplex: full----link used for llt

    e1000g3         link: up        speed: 1000  Mbps       duplex: full----link used for llt

    if anybody knows solution to above problem pls guide me i think i m one step behind my cluster configuration . Thanks for your support.

    Anish

  • mikebounds's avatar
    mikebounds
    Level 6
    13 years ago

    LLT config looks ok, so problem is probably with configuration of networks in VMWare.  Could you plumb in IPs on heartbeats temporarily so that you can test HB links using ping.

    Can you also provide output of 2 commands below:

    lltstat -nvv
 eeprom | grep mac

    Mike

  • Anish's avatar
    Anish
    Level 4
    13 years ago

    Hi Mike,

    Sorry for late reply. It is sucessful now.

    Actually I was troubleshooting for llt and gab errors only.

    As per your post it was right the problem was because of interface only. I was using VMWare workstation 8.0 and there i found that when i add more than three host-only netwrok adapter last interface i.e. e1000g3 was not communicating to other nodes due to which my llt and gab was failing. I tried so many thing finally moved VMware server 2.0 there i dont found any limitations and my configuration is sucessful. Here is the output from both nodes:

    I think this must be expected output (Pls correct if i missed somewhere):

     

    on dev node:

    bash-3.00# lltstat -nl
    LLT node information:
        Node                 State    Links
       * 1 dev               OPEN        2
         2 prod              OPEN        2
    LLT link information:
    link 0  e1000g1 on etherfp hipri
            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6
            txpkts 15584  txbytes 1158103
            rxpkts 15977  rxbytes 1377027
            latehb 5  badcksum 0  errors 0
    link 1  e1000g2 on etherfp hipri
            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6
            txpkts 15416  txbytes 1138179
            rxpkts 15892  rxbytes 1389545
            latehb 5  badcksum 0  errors 0

    bash-3.00# uname -n
    dev

    bash-3.00# gabconfig -a
    GAB Port Memberships
    ===============================================================
    Port a gen  15f9501 membership ;12
    Port h gen  15f9509 membership ;12

    bash-3.00# hastatus -sum

    -- SYSTEM STATE
    -- System               State                Frozen

    A  dev                  RUNNING              0
    A  prod                 RUNNING              0
    bash-3.00#

    on prod node:

    bash-3.00# lltstat -nl
    LLT node information:
        Node                 State    Links
         1 dev               OPEN        2
       * 2 prod              OPEN        2
    LLT link information:
    link 0  e1000g1 on etherfp hipri
            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6
            txpkts 15558  txbytes 1356519
            rxpkts 16607  rxbytes 1226122
            latehb 17  badcksum 0  errors 0
    link 1  e1000g2 on etherfp hipri
            mtu 1500, sap 0xcafe, broadcast FF:FF:FF:FF:FF:FF, addrlen 6
            txpkts 15642  txbytes 1344401
            rxpkts 16768  rxbytes 1244054
            latehb 17  badcksum 0  errors 0

    bash-3.00# gabconfig -a
    GAB Port Memberships
    ===============================================================
    Port a gen  15f9501 membership ;12
    Port h gen  15f9509 membership ;12
    bash-3.00# uname -n
    prod
    bash-3.00# hastatus -sum

    -- SYSTEM STATE
    -- System               State                Frozen

    A  dev                  RUNNING              0
    A  prod                 RUNNING              0
    bash-3.00#

    Thank you all for supporting .

    I know this is just start and long way ahead , I will keep you posted if sometime i will be trouble ....... Thnx once again.

    Regards,

    Anish