Forum Discussion

Zahid_Haseeb's avatar
Zahid_Haseeb
Moderator
12 years ago

MultiNIC faulted and then switchover the base+virtual IP to another interface

Expected Environment Solaris 10 HA 6.0 (Single Node Cluster) one built-in interface on solaris machine (bge0) four port interface card installed (qfe0, qfe1, qfe2, qfe3)   I configured Mu...
business continuity
Cluster Server
  • mikebounds's avatar
    mikebounds
    12 years ago

    As I said in earlier post:

    It may have faulted as qfe0 was plumbed in as I think this is not supposed to be plumbed in.  Now that bge0 is not plumbed in, can you repeat test

    and Paresh has confirmed this, so can you test with just one interface plumbed in.  Paresh suggests not plumbing any in, but the normal sequence of events is that you plumb in the preferred interface in boot up (i.e suppose you want qfe0 to be be plumbed in then you create a /etc/hostname.qfe0 file) and you leave the other interface unplumbed.

    Mike

mikebounds's avatar
mikebounds
Level 6
12 years ago

As I said in earlier post:

It may have faulted as qfe0 was plumbed in as I think this is not supposed to be plumbed in.  Now that bge0 is not plumbed in, can you repeat test

and Paresh has confirmed this, so can you test with just one interface plumbed in.  Paresh suggests not plumbing any in, but the normal sequence of events is that you plumb in the preferred interface in boot up (i.e suppose you want qfe0 to be be plumbed in then you create a /etc/hostname.qfe0 file) and you leave the other interface unplumbed.

Mike