Forum Discussion
Hi,
My VCS version is the following:
[root@node1 litp-admin]# haclus -value EngineVersion
6.1.10.000
I did both. Fisrt I used the following commands to set the llt network:
lltconfig -u bond0
lltconfig -t bond0 -d bond0 -l
And then I modified the /etc/llttab files and restarted the nodes.
After this the interfaces are DOWN in the other nodes.
sudhirh, In this case I only have one ethernet interface attach to the bond, so I think it should not be a problem with the swich.
I have found that if I unlink the bond from the bridge:
brctl delif br0 bond0
Then the interfaces are up:
[root@node2 ]# lltstat -nvv|head
LLT node information:
Node State Link Status Address
0 node1 OPEN
eth3 UP 52:54:00:BC:9B:E5
eth2 UP 52:54:00:31:FB:31
bond0 UP 52:54:00:2E:6D:23
* 1 node2 OPEN
eth3 UP 52:54:00:C3:A0:55
eth2 UP 52:54:00:35:F6:A5
bond0 UP 52:54:00:14:13:21[root@node1 ]# lltstat -nvv|head
LLT node information:
Node State Link Status Address
* 0 node1 OPEN
eth3 UP 52:54:00:BC:9B:E5
eth2 UP 52:54:00:31:FB:31
bond0 UP 52:54:00:2E:6D:23
1 node2 OPEN
eth3 UP 52:54:00:C3:A0:55
eth2 UP 52:54:00:35:F6:A5
bond0 UP 52:54:00:14:13:21
Related Content
- 6 days ago
- 5 years ago