I've looked at the output in the tar file, MIRTL02.info.0217152740.19910.log , I see its set to A/P
libvxlsiall.so:claim_device() : CLAIMED
VID : SUN
PID : SUN_6180
ANAME : SUN6180-
ATYPE : A/P <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
CAB_SERIAL_NO : 60080E500018C9B4000000004E0B9255
LUN_SERIAL_NO : 60080E500018345E000002394E37D4B2
ARRAY_CTLR_ID : B
PORT_SERIAL_NO : B-2
REVISION : 0777
SCSI_VERSION : 5
UDID : SUN_SUN_6180_60080E500018C9B4000000004E0B9255_60080E500018345E000002394E37D4B2
LUN_OWNER : N
CUR_OWNER : N
claim_device() New attribute : ARRAY_CTLR_ID
ARRAY_CTLR_ID : B
=====================================================================
ibvxlsiall.so:claim_device() : CLAIMED
VID : SUN
PID : SUN_6180
ANAME : SUN6180-
ATYPE : A/P <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
CAB_SERIAL_NO : 60080E500018C9B4000000004E0B9255
LUN_SERIAL_NO : 60080E500018345E000002394E37D4B2
ARRAY_CTLR_ID : A
PORT_SERIAL_NO : A-2
REVISION : 0777
SCSI_VERSION : 5
claim_device() New attribute : CUR_OWNER
CUR_OWNER : N
So I believe the technote is giving the right direction, you need to get array to be configured in A/PF-LSI mode for ASL to come to active state
G