Georges_Ostiguy
Level 3
Joined 20 years ago
User Profile
User Widgets
Contributions
Spooler error after new installation of Backup Exec 10
Everytime I reboot server after installing I get spooler crash or error which causes delays in further logins etc I vaguely remember a solution was available for this SP5 for Backup exec 10 installed Can someone help Thank you Georges Ostiguy gostiguy@tarainfo.com271Views0likes1CommentRe: Newly Installed Server Hangs when logging out after BE 10 install
I just told the server to reboot. This time I left it alone It took about 10 minutes to close down and rebbot when I was able to login I checked the event viewer and I get the following errors These errors where not present at all before BE 10 was installed Begin of event log 27/05/200510:49:38 AMexabyte2VRTSWarningNone54N/ACORLITE-SAPAn Io Request to the device \Device\Tape0 did not complete or canceled within the specific timeout. This can occur if the device driver does not set a cancel routine for a given IO request packet. 27/05/200510:44:10 AMRemovable Storage ServiceErrorNone17N/ACORLITE-SAPRSM cannot manage library Tape0. It encountered an unspecified error. This can be caused by a number of problems including, but not limited to, database corruption, failure communicating with the library, or insufficient system resources. 27/05/200510:43:08 AMq57w2kInformationNone9N/ACORLITE-SAPHP NC7761 Gigabit Server Adapter: Network controller configured for 100Mb full-duplex link. 27/05/200510:43:06 AMq57w2kInformationNone15N/ACORLITE-SAPHP NC7761 Gigabit Server Adapter: Driver initialized successfully. 27/05/200510:43:17 AMEventLogInformationNone6005N/ACORLITE-SAPThe Event log service was started. 27/05/200510:43:17 AMEventLogInformationNone6009N/ACORLITE-SAPMicrosoft (R) Windows 2000 (R) 5.0 2195 Service Pack 4 Multiprocessor Free. 27/05/200510:41:08 AMEventLogInformationNone6006N/ACORLITE-SAPThe Event log service was stopped. 27/05/200510:40:56 AMexabyte2VRTSWarningNone54N/ACORLITE-SAPAn Io Request to the device \Device\Tape0 did not complete or canceled within the specific timeout. This can occur if the device driver does not set a cancel routine for a given IO request packet. 27/05/200510:35:28 AMexabyte2VRTSWarningNone54N/ACORLITE-SAPAn Io Request to the device \Device\Tape0 did not complete or canceled within the specific timeout. This can occur if the device driver does not set a cancel routine for a given IO request packet. 27/05/200510:32:18 AMDCOMErrorNone10005CORLITE-SAP\AdministratorCORLITE-SAP"DCOM got error ""The service did not respond to the start or control request in a timely fashion. "" attempting to start the service netman with arguments """" in order to run the server: {BA126AD1-2166-11D1-B1D0-00805FC1270E} " 27/05/200510:32:18 AMService Control ManagerErrorNone7000N/ACORLITE-SAPThe Network Connections service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. 27/05/200510:32:18 AMService Control ManagerErrorNone7011N/ACORLITE-SAPTimeout (30000 milliseconds) waiting for a transaction response from the Netman service. 27/05/200510:31:48 AMDCOMErrorNone10005CORLITE-SAP\AdministratorCORLITE-SAP"DCOM got error ""The service did not respond to the start or control request in a timely fashion. "" attempting to start the service netman with arguments """" in order to run the server: {BA126AD1-2166-11D1-B1D0-00805FC1270E} " 27/05/200510:31:48 AMService Control ManagerErrorNone7000N/ACORLITE-SAPThe Network Connections service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. 27/05/200510:31:48 AMService Control ManagerErrorNone7011N/ACORLITE-SAPTimeout (30000 milliseconds) waiting for a transaction response from the Netman service. 27/05/200510:29:59 AMRemovable Storage ServiceErrorNone17N/ACORLITE-SAPRSM cannot manage library Tape0. It encountered an unspecified error. This can be caused by a number of problems including, but not limited to, database corruption, failure communicating with the library, or insufficient system resources. 27/05/200510:28:57 AMq57w2kInformationNone9N/ACORLITE-SAPHP NC7761 Gigabit Server Adapter: Network controller configured for 100Mb full-duplex link. 27/05/200510:28:55 AMq57w2kInformationNone15N/ACORLITE-SAPHP NC7761 Gigabit Server Adapter: Driver initialized successfully. 27/05/200510:29:06 AMEventLogInformationNone6005N/ACORLITE-SAPThe Event log service was started. 27/05/200510:29:06 AMEventLogInformationNone6009N/ACORLITE-SAPMicrosoft (R) Windows 2000 (R) 5.0 2195 Service Pack 4 Multiprocessor Free. 27/05/200510:26:56 AMEventLogInformationNone6006N/ACORLITE-SAPThe Event log service was stopped. 27/05/200510:26:23 AMTermServDevicesErrorNone1106N/ACORLITE-SAPThe printer could not be installed. 27/05/200510:26:23 AMTermServDevicesErrorNone1111N/ACORLITE-SAPDriver EPSON Stylus COLOR 880 required for printer EPSON Stylus COLOR 880 is unknown. Contact the administrator to install the driver before you log in again. 27/05/20059:37:10 AMPrintWarningNone3NT AUTHORITY\SYSTEMCORLITE-SAPPrinter Brother HL-10h/TARA-P4-NO2/Session 1 was deleted. 27/05/20059:37:10 AMPrintWarningNone4NT AUTHORITY\SYSTEMCORLITE-SAPPrinter Brother HL-10h/TARA-P4-NO2/Session 1 is pending deletion. 27/05/20059:37:10 AMPrintWarningNone8NT AUTHORITY\SYSTEMCORLITE-SAPPrinter Brother HL-10h/TARA-P4-NO2/Session 1 was purged. End of Event Log Please help818Views0likes0CommentsNewly Installed Server Hangs when logging out after BE 10 install
The environment is the following Server 2000 SP4 SQL Server 2000 SP4 BE ver 10 ver 5484 (downloaded from Veritas) Including license for Backup exec 2 licenses for remote server and 1 license for sql server After installing BE, although BE backups succesfully if one attemps to logout or shut down from server locally (console) or thru terminal services in about half the cases the server hangs If I remove BE everything is normal again The Server is an HP proliant server I have tried to install twice; once on the sql server on that server , once using the sql instance that BE provides The result is approximately the same This is my first experience with ver 10 Have installed 9.1 before not on same machine and never had such problems Must resolve this problem Please help Georges Ostiguy gostiguy@tarainfo.com817Views0likes8Comments