I tried to reset to default factory and restart the configuration, but it is not end fine. I can see a difference, now the appliance is partitioned fine, only it can't create the disk pool. I would like to create the DP by myself but the deduppassword is not configured.
- [Info] Performing sanity check on disks and partitions... (5 mins approx)
B00A21B7101FEAE0BDB9788893 (Expansion)
--------------------------------------
AdvancedDisk : 4.54 TB
- 0 : 4.54 TB
Configuration : 50 GB
- 0 : 50 GB
MSDP : 44.52 TB
- 0 : 44.52 TB
B00B809B301FEC159C17E90025 (Base)
--------------------------------------
MSDP : 4.38 TB
- 1 : 4.38 TB
MSDP Catalog : 160 GB
- 0 : 160 GB
appliance08.Appliance> Media master
- [Info] Checking the pre-requisites...
- [Info] Appliance storage can be used for configuration.
- [Info] Validating master server name 'master'.
Master server communication check .... :[OK]
Name lookup check ........ :[OK]
Firewall/Port check ........ :[OK]
Master server access pre-check ....... :[OK]
Restarting NetBackup services ........ :[OK]
Master server access check ........ :[OK]
EMM server access check ........ :[OK]
Master server reverse access check ... :[OK]
Version compatibility check ........ :[OK]
- [Info] Using master as master server.
- [Info] Scanning storage system...
- [Info] The scan operation can take up to 15 minutes to complete.
- [Info] Refreshing the storage devices...
- [Info] Acquired lock on the storage.
- [Info] Looking for existing storage configurations...
- [Info] No existing storage configurations found.
- [Info] Looking for existing storage configurations...
- [Info] Creating a new storage configuration now...
- [Info] Storage partitions are not present.
- [Info] 'Configuration' partition does not exist. Creating it now...
- [Info] The estimated time to create the 'Configuration' partition can range from 0 hours, 2 minutes to 0 hours, 5 minutes depending on the system load. The greater the system load the longer it takes to complete the resize operation.
- [Info] Creating the 'Configuration' partition '0'...
- [Info] Mounting the 'Configuration' partition '0'...
- [Info] Moving appliance configuration database to the Configuration partition.
---------------------------------------------------------------
INFO: Adding the following servers to the NetBackup configuration
SERVER=master
---------------------------------------------------------------
- [Info] Configuring media server on the appliance...
- [Info] Restarting NetBackup services.
Enter storage configuration properties.
You have the opportunity to configure AdvancedDisk and Media Sever Deduplication Pool (MSDP) partitions.
You can view a summary of the storage settings and edit them, if desired.
1. To configure a storage pool, you must enter the following:
The size, the diskpool name, and the storage unit name.
2. To skip configuration, enter 0 (zero) when prompted for the size.
This also deletes any existing data.
3. To keep the storage pool intact, choose the default size, if applicable.
>> AdvancedDisk partition size in GB/TB [1 GB..53.60 TB]: (1 GB) 4.54 TB
>> AdvancedDisk diskpool name: (dp_adv_appliance08)
>> AdvancedDisk storage unit name: (stu_adv_appliance08)
>> MSDP partition size in GB/TB [5 GB..48.91 TB]: (5 GB) 48.91
- [Error] You must enter a valid value. For example, 512 GB or 8 TB.
>> MSDP partition size in GB/TB [5 GB..48.91 TB]: (5 GB) 48.91 TB
>> MSDP diskpool name: (dp_disk_appliance08)
>> MSDP storage unit name: (stu_disk_appliance08)
- [Info] The 'MSDP' partition of '48.91 TB' requires a minimum 'MSDP Catalog' partition of '160 GB'.
>> MSDP Catalog partition size in GB/TB [160 GB..160 GB]: (160 GB)
- [Info] Summary of storage configuration.
-> AdvancedDisk partition size: 4.54 TB
-> AdvancedDisk diskpool name: dp_adv_appliance08
-> AdvancedDisk storage unit name: stu_adv_appliance08
-> MSDP Catalog partition size: 160 GB
-> MSDP partition size: 48.91 TB
-> MSDP diskpool name: dp_disk_appliance08
-> MSDP storage unit name: stu_disk_appliance08
The estimated time to configure storage can range from 0 hours, 7 minutes to 0 hours, 16 minutes depending on the system load. There may also be several minutes to restart the NetBackup services. The greater the system load the longer it takes to complete the operation.
>> Do you want to make changes to the storage configuration shown above? [yes,no]: no
- [Info] Creating storage partitions and NetBackup storage objects...
- [Info] Stopping NetBackup processes... (6 min approx)
- [Info] Starting NetBackup processes... (6 min approx)
- [Info] Setting the 'AdvancedDisk' storage partition size to '4.54 TB'...
- [Info] 'AdvancedDisk' partition does not exist. Creating it now...
- [Info] The estimated time to create the 'AdvancedDisk' partition can range from 0 hours, 2 minutes to 0 hours, 5 minutes depending on the system load. The greater the system load the longer it takes to complete the resize operation.
- [Info] Creating the 'AdvancedDisk' partition '0'...
- [Info] Mounting the 'AdvancedDisk' partition '0'...
- [Info] Setting the 'MSDP Catalog' storage partition size to '160 GB'...
- [Info] 'MSDP Catalog' partition does not exist. Creating it now...
- [Info] The estimated time to create the 'MSDP Catalog' partition can range from 0 hours, 2 minutes to 0 hours, 5 minutes depending on the system load. The greater the system load the longer it takes to complete the resize operation.
- [Info] Creating the 'MSDP Catalog' partition '0'...
- [Info] Mounting the 'MSDP Catalog' partition '0'...
- [Info] Setting the 'MSDP' storage partition size to '48.91 TB'...
- [Info] Checking the 'MSDP Catalog' space requirements for expanding the 'MSDP' partition...
- [Info] 'MSDP' partition does not exist. Creating it now...
- [Info] The estimated time to create the 'MSDP' partition can range from 0 hours, 2 minutes to 0 hours, 5 minutes depending on the system load. The greater the system load the longer it takes to complete the resize operation.
- [Info] Creating the 'MSDP' partition '0'...
- [Info] Mounting the 'MSDP' partition '0'...
- [Info] Creating the 'MSDP' partition '1'...
- [Info] Mounting the 'MSDP' partition '1'...
- [Info] Creating 'AdvancedDisk' DiskPool 'dp_adv_appliance08' and Storage Unit 'stu_adv_appliance08'...
- [Error] Failed to create the NetBackup disk pool 'dp_adv_appliance08' and storage unit 'stu_adv_appliance08' for 'AdvancedDisk' storage.
- [Error] Failed to create storage partitions for appliance 'appliance08'.
appliance08.Appliance>
appliance08.Appliance> help
^
Exit Log out and exit from the current shell.
Master Configure this appliance as a NetBackup master appliance.
Media Configure this appliance as a NetBackup media server.
Return Return to the previous menu.
Shell Shell operations.
Status Display appliance status information.