IPMI Port

Not sure if i am too late for you but there is also an issue with 5230's and their IPMI that can be resolved using the intel tools on board.

Try this:

You need to wait 1-2 minutes between issuing each of the two –r** switch commands

appliancename:/home/maintenance # cd /opt/
appliancename:/opt # cd Intel_tools/
appliancename:/opt/Intel_tools # ls
OFU  syscfg_V11_B9  syscfg_V5.0.1_B27  sysinfo_V1  sysinfo_V11
appliancename:/opt/Intel_tools # cd syscfg_V11_B9
appliancename:/opt/Intel_tools/syscfg_V11_B9 # ls
syscfg
appliancename:/opt/Intel_tools/syscfg_V11_B9 # ./syscfg -rfs
Successfully Completed
appliancename:/opt/Intel_tools/syscfg_V11_B9 # ./syscfg -rbmc
Successfully Completed
appliancename:/opt # cd /usr/bin/
appliancename:/usr/bin #./ipmitool lan set 3 ipaddr <ip address>
appliancename:/usr/bin #./ipmitool lan set 3 netmask <netmask>
appliancename:/usr/bin #./ipmitool lan set 3 defgw ipaddr <default gateway>
appliancename:/usr/bin #./ipmitool lan set 3 access on
appliancename:/usr/bin #./ipmitool user set name 3 sysadmin
appliancename:/usr/bin #./ipmitool channel setaccess 3 3 callin=off ipmi=on link=on privilege=4
appliancename:/usr/bin #./ipmitool user set password 3 P@ssw0rd
appliancename:/usr/bin #./ipmitool user enable 3
appliancename:/usr/bin #./ipmitool bmc reset cold

Hope this helps