Forum Discussion

nike_new's avatar
nike_new
Level 6
12 years ago

bptestbpcd just hangs

  -bash-3.2$ sudo ./bptestbpcd -client ukunix12  -debug 07:46:29.949 [12028] <2> bptestbpcd: VERBOSE = 0 07:46:29.949 [12028] <2> read_client: dname=., offline=0, online_at=0 07:46:29.949 [12...
7.1.x and Earlier
Backup and Recovery
NetBackup
  • Marianne's avatar
    Marianne
    12 years ago

    This means IP address for client ukunix12 is correct on server uv23 (IP address 13.129.31.32)

    The server where you did bptestbpcd in your opening post has IP address of 13.11.31.32.

    You need to carefully check IP addresses and hostnames in /etc/hosts for ALL servers and clients.

    If you have a backup network, you need to ensure that each IP address has a different hostname in /etc/hosts and/or DNS.

    Ensure that correct hostnames are used in NBU.

    You said 3 days ago that nothing is logged in bpcd log.
    Now we see connection attempt in bpcd.

    Question:

    WHAT HAS CHANGED??
     

    Have you followed any of the advice above?

nike_new's avatar
nike_new
Level 6
12 years ago

 

-bash-3.00$ ifconfig -a
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 13.129.39.95 netmask ffffff00 broadcast 13.129.39.255
bge0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 13.129.39.155 netmask ffffff00 broadcast 13.129.39.255
bge0:4: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 13.129.39.175 netmask ffffff00 broadcast 13.129.39.255
bge0:5: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 13.129.39.154 netmask ffffff00 broadcast 13.129.39.255
nxge1:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
        inet 10.5.103.38 netmask ffff0000 broadcast 10.5.255.255
-bash-3.00$
 
 
W are using below ip
13.129.39.255