Configuring MSDP catalog Backup
Hello all,
I'm in the midst of creating backup for MSDP catalog. I was inform that it is not covered in our daily catalog backup. I did found the guide for MSDP catalog backup but still confused.
I also found there is a Backup policy named " SYMC_NBA_Dedupe_Catalog_mssbxxx" in under Policies. What must I do first? Did tried activate, modified the policy storage and run the backup policy but failed with error code 9. Also tried to invoke drcontrol command below but failed as well.
/usr/openv/pdde/pdcr/bin/drcontrol --policy SYMC_NBA_Dedupe_Catalog_mssbxxx --residence stu_disk_mssbxxx --client mssbxxx --hardware 5230 --OS NetBackup-Appliance
drcontrol:
The NetBackup Deduplication Catalog Policy Administration and
Catalog Disaster Recovery utility.
Note: this utility must be run directly on the NetBackup Deduplication storage
server. It cannot be run remotely.
drcontrol -new_policy [-policy policy_name] [-client media_server_name] [-OS os_type] [-hardware hardware] [-residence residence]
drcontrol -update_policy -policy <policy_name> [-client media_server_name] [-OS os_type] [-hardware hardware]
drcontrol -list_files -policy <policy_name> [-client media_server_name]
drcontrol -print_space_required -policy <policy_name> [-client media_server_name]
drcontrol -initialize_DR -policy <policy_name> [-client media_server_name]
drcontrol -recover_last_image -policy <policy_name> [-client media_server_name]
drcontrol -refresh_shadow_catalog
drcontrol -finalize_DR -policy <policy_name> [-client media_server_name]
drcontrol -auto_recover_DR -policy <policy_name> [-client media_server_name]
drcontrol -cleanup
Optional args:
drcontrol -?/-h
drcontrol -help
drcontrol [-verbose] [-log_file log_file_name]
Please select exactly 1 of the following actions:
--new_policy, --update_policy, --list_files, --auto_recover_DR, --initialize_DR, --recover_last_image, --refresh_shadow_catalog, --finalize_DR, --print_space_required, --cleanup, --copyrights, --help.
Thank you
Tarmizi
Hello,
several notes:
- you should run this command connected to appliance as NetBackup Appliance CLI Administrator. have you run this so? Refer to Appliance Admin Guide how to create CLI user.
- you must run it with -new_policy or -update_policy, you are missing both. Also this parameter should be enough, the other parameters like OS will figure out the appliance instead of you
- dont place MSDP Catalog backup to MSDP, direct it to another storage unit
Regards
Michal