EMM status: Storage Server is down or unavailable
- 12 years ago
Could be a number of causes - the extra ports used by NetBackup often causes the issue - as you are on Windows 2008 try the following (the registry one needs a reboot - the netsh takes effect immediately), these will increase the number of ports available and reduce the time wait delay to free ports up quicker:
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
Add a new DWORD – TcpTimedWaitDelay - Decimal Value of 30
netsh int ipv4 set dynamicport tcp start=10000 num=50000Next - to keep communications with the Storage Server running better add the following flat file to the Master and Storage Servers:
<install path>\veritas\netbackup\db\config\DPS_PROXYDEFAULTRECVTMO
open it up in notepad and put a value of 800 in it
All of the above can really help with this issue
Hope this helps