Forum Discussion

greatashkan's avatar
greatashkan
Level 3
6 years ago

inventory robot misspath

Hello everyone, I have problem with inventory robot on NBU 8.1.1.  We have a master server and three media server. I was changing one of the media servers because of the slow tape write ratio. Ther...
8.1.1
8.1.2
missing path
tld
  • Marianne's avatar
    Marianne
    6 years ago
    I was hoping to see the robot in scan output, but you only showed one tape drive?

    If you are 100% sure that all devices are seen correctly, then best to completely reconfigure all devices to reflect updated device paths.

    Delete all devices on all media servers.
    Run device config wizard and only select the RCH. Allow to complete the process and restart services.
    Run the wizard again and now select RCH and other media servers.
    All device paths should now be correct.

    To know why drives go DOWN, add
    VERBOSE
    to vm.conf on all media servers and restart NBU Device Manager. (You can add VERBOSE before you re-config devices.)
    When drive is DOWN'ed, the reason will be logged in Event Viewer Application log on the media server where drive was DOWN'ed.
Marianne's avatar
Marianne
Level 6
6 years ago
Only one media server can be the Robot Control Host.
You need to determine which media server is RCH and then confirm that the robot path is seen at OS-level.

Please run 'scan' command (in .....volmgr/bin directory) on RCH.

Do you see the tape library?
  • greatashkan's avatar
    greatashkan
    Level 3
    6 years ago

    The scan.exe on media server shows the tapes and the changer. 

    ###

    • Marianne's avatar
      Marianne
      Level 6
      6 years ago
      I was hoping to see the robot in scan output, but you only showed one tape drive?

      If you are 100% sure that all devices are seen correctly, then best to completely reconfigure all devices to reflect updated device paths.

      Delete all devices on all media servers.
      Run device config wizard and only select the RCH. Allow to complete the process and restart services.
      Run the wizard again and now select RCH and other media servers.
      All device paths should now be correct.

      To know why drives go DOWN, add
      VERBOSE
      to vm.conf on all media servers and restart NBU Device Manager. (You can add VERBOSE before you re-config devices.)
      When drive is DOWN'ed, the reason will be logged in Event Viewer Application log on the media server where drive was DOWN'ed.
      • greatashkan's avatar
        greatashkan
        Level 3
        6 years ago

        The devices are seen correctly. Sorry i didn't copied al the scan output. I didn't want to be messy. 
        I am trying to reconfigure the device as you said. I will follow up with you later. Thanks.

    • greatashkan's avatar
      greatashkan
      Level 3
      6 years ago

      To add the last reply I have to say that the tdltest.exe -r command works successfully and the robtest.exe command either shows the robot.