ISCSI Tape Drive

i used the Symantec backup exec 2010  media server from life environment just to make sure that tape drive will be dedcted on Netbackup

how did you make sure weather netbackup can detect of not by backup Exec?

what the error that it has given when you run the device config wizard...?

Yes, please explain that comment. I suspect it will be interesting.

Can you advice why it is failed...is it because the tape drive already accessed by symantec backup exec or what??

Yes.

You cannot have 2 backup applications accessing/controlling the same devices.

To verify iSCSI support, check the NBU HCL for the make/model of your hardware:  http://www.symantec.com/docs/TECH76495

Ok...let me clear the issue:

Netbackup Master  server : Serer A.

Net Backup Media Server : Server B (Where Symnatec backup Exec 2010 already run and ISCI tape Drive is attached , daily backup jobs are exist on this environment).

I am trying to lwt Netbackup detect the tape drive attached to server B for testing purposes.

I am using Device configuration wizard which shows only "Failed"- check attached screenshot Configyration Wizard

I used other commands i found in some article and i attched the results.

I am new to Netbackup and need help

You cannot use NetBackup Device Config Wizard to find/configure devices on a Backup Exec media server.

The backup software installed on the 2 backup servers are incompatible.

You can only use scan and device config wizard where NetBackup is installed.
All other backup software must be removed before NetBackup can be installed.

scan will only look for devices on the server where the command is executed.

Netbackup installed in media server as well as backup exec...you mean that this will not work ??

Natbackup must be installed alone on the media server?