The error is more likely to do with an issue on DD, rather than NBU or NetApp.
This looks like a problem with backup image on the DD:
09:21:27.548 [17598] <32> do_include_image: include image error, bytesw(53248) not equal to wlen(524288) 09:21:27.549 [17598] <32> write_data: image write failed: error 2060022:
You need to check logs on the DD for any clues. Or send those 2 lines to your DD support team.
Also check the bptm entries leading up to the <32> critical errors to see if there is any additional info.
Marianne,
Thank you. I will create case with EMC because I do not see any clues in DD logs.
Hi MateuszK
I am not sure Data Domain is the one to blame, since it looks like to be a issue sending block to disk (bptm process).
I would take a look at the Netapp syslog (Think that is the "event log show" command) to check for further error messages.
Best Regards
Nicolai
Please note that bptm is merely reporting the error that it received from DD via the OST plugin.
Error 20600xx is always an error reported by the OST plugin.
Here is the problem :
... image error, bytesw(53248) not equal to wlen(524288)
The problem is with the image size on DD.
Thank you everyone for the involvement.
I have worked with EMC and there was no problems on DD. I have also incresed verbosity on logs in Netbackup and the was no issues too.
The problem was with the NetApp storage. I do not have any logs and do not know what it was exacly but the storage team fixed something and backup is running properly now.
