ndt
13 years agoLevel 4
Netbackup - Robots Inventory
Hi all,
Please help me configure NBU in order to detect all tape in tape library. As pic below, It seems that NBU only detect two tapes in drives. It does not inventory tape in cartrige.
I tried ...
- 13 years ago
Resolution
Please review the following information.
The Sun StorageTek C4 tape library allow three different setting for Media Access Port /Load Port.
- None
- Single column
- Whole Magazine
In order to change to None or No Media Access Port follow the steps below.
Step 1 - Stop Netbackup
/usr/openv/netbackup/bin/goodies/netbackup stop
Step 2 - Change configuration setting on C4 OCP (Operator Control Panel)
Select Setup
Select Cabinet setup
Select Left load port OR Right load port
Select Disable (Make sure both is set to OFF)Return to the main menu on OCP
Step 3 - Start Netbackup
/usr/openv/netbackup/bin/goodies/netbackup start
Step 4 - Confirm new setting with robtest
/usr/openv/volmgr/bin/robtest Configured robots with local control supporting test utilities: TLD(0) robotic path = /dev/sg/c0tw100000e0022350e2l0
. . . slot 1 (addr 256) contains Cartridge = no slot 2 (addr 257) contains Cartridge = no slot 3 (addr 258) contains Cartridge = no . . . slot 36 (addr 291) contains Cartridge = no slot 37 (addr 292) contains Cartridge = no slot 38 (addr 293) contains Cartridge = no READ_ELEMENT_STATUS complete