Configure client side deduplication
- 10 years ago
Are you using MSDP/NBU appliance storage in your environment? If so, then all you need to do is to do ths
http://www.symantec.com/business/support/index?page=content&id=HOWTO70503#v27497507
If you're not using MSDP/NBU appliance storage then you need to get that done first.
- 10 years ago
As said in previous reply
http://www.symantec.com/business/support/index?page=content&id=HOWTO70503#v27497507
No limitations / restrictions.
If the clients have many files (>1000000) you could enable accelerator as well.
- 10 years ago
http://www.symantec.com/docs/TECH199723
With NetBackup clients at 7.5.0.x, multistreaming is supported, but ONLY for a maximum of 2 streams..
- 10 years ago
You need to give us more specific of "what is not working as expected", any error code or message?
If it's just taking too long, it could mean the client you setup for deduplication is not up to the system requirements, things like:
- Client being a 32bit OS.
- RAM/CPU/disk performance on client. If it only has 4GB RAM or an Intel Core 2 Duo or below, that's probably not good enough.Note that having a client-side deduplication means that you are having a deduplication engine running on the client itself, before sending the dedup data over to media server. So the client ought to have the "power" to run the deduplication.
If all the above are good, client-side dedup should be fine. Well.. first backup might be slow, but subsequently with the deduplication it will get faster over time (unless more new data are coming in).
For logs, you can check nbostpxy & bpbkar on the client, increase to verbose=5 if needed.