Re-configuring tape drives NBU 7.0.1
Hi, I'm running NBU 7.0.1 on RHEL5. We have a Scalar i2000 tape robot with 12 drives. Last week I completed a hardware / OS refresh and after the Hot Catalog Restore most everything is working OK. Bu...
Looking at the device serial numbers helped out (# tpconfig -dl). The master server discovered 12 drives & 1 robot, which is correct. One of the media servers (which I didn't touch) showed a new drive marked DOWN (# tpautoconf -report_disc). It's serial number didn't match any of the S/Ns reported by the Master server.
From the GUI, I deleted the "phantom" drive. Then I re-ran the device configuration wizard. It appears that everything is now OK.
Thanks for your help. -Mike
