lovethatcheese
10 years agoLevel 5
Tape drive - restart mode
Hi all,
I have a tape drive in 'restart' mode. I restarted services on media / master, made sure it was plugged in locally to the media server, and power cycled the tape drive itself. Are there ot...
- 10 years ago
RESTART well be seen in vmoprcmd output, along side a media server.
What should resolve the issue is restarting ltid on the media servers that indicate RESTART, which may be multiple machines.
Before doing this, with no jobs running it might be worth running nbrbutil -resetall to release any reservations.
I don't think you need to worry about the wizard, that would be for reconfiguring the devices, but there is no indication at the moment that this is required.
- 10 years ago
As mph999 mentioned restart ltid. For furture reference TECH31149 gives the drive status field descriptions for drives, like restart:
RESTARTThe control mode for a shared drive may not be the same on all hosts sharing the drive. This status indicates that ltid needs to be restarted. To determine what server need to be restarted, right-click the drive in the device monitor and select up. This will tell you what servers that ltid needs to be restarted.