Backup Jobs are getting failed with V-79-57344-41488 - Due to one or more errors in \\server\E:, this backup cannot be used for conversion to virtual machines, Simplified Disaster Recovery (SDR), or a complete online restore.
Hello All, We are using Backup Exec 2014 SP2 In a Windows 2012 R2 server as a media server and taking backups of the Clients through Remote agent. Few are windows 2008 server and one of them is Windows 2012 R2 server. The issue started with the Win2012 R2 remote agent while backing up the backup is getting failed for the drives with the above mentioned error.The files are normal flat files. Media Server : Windows 2012 R2 64 bit Remote Agent : Windows 2012 R2 64 bit I have tried to take backup of those problematic folder through WIndows server backup however it got successful in that case. The account which we are using for taking backup is domain user however its been added to remote agents local admin too.But no luck. Would appreciate if any wrokariound or solution can be provided except asking for upgrade it to BE 15 ;) .Solved17KViews0likes10CommentsError Message E00084CA The data being read from the media is inconsistent
Hello, I have a strage occurence at a customers site. When I install the remote agent on 2 servers and start a backup I immediatly get the E00084CA Error. When I disable the agent and do a network share backup all is ok. It is not the tape nor the tape unit.. Local backups are OK, only remote backups with the agent on these 2 servers are not ok. we have tried another server with the agent and it went OK too... What can be the problem, If I do a test run all seems ok. Best regards Jakob-Jan v/d Laan Senior Network Specialist Bol Networks403Views0likes2CommentsThe job failed with the following error
We have updated BackupExec from 2012 to 2014 and all job are running fine but on a few backup jobs i am receiving following error. In one job i am receiving following error.. Completed status: Failed Final error: 0xe000942a - Backup Exec did not find any resources to include in the backup. Check the backup selections for this job to make sure it includes resources that are available for backup. Final error category: System Errors For additional information regarding this error refer to link V-79-57344-37930 and another job is failing with following error: Completed status: Failed Final error: 0x2000fe07 - FS_NO_MORE Final error category: For additional information regarding this error refer to link V-79-8192-65031 Please help me out in this...Solved5.4KViews3likes3CommentsNetbackup Deduplication Licensing
Hi guys, This is my first post talking about Netbackup Solution. I'mplannig a NBU7 Deduplication but I don't know the differences about this option. 1 - SYMC NETBACKUP DEDUPLICATION OPTION 2 - SYMC NETBACKUP PLATFORM DEDUPLICATION OPTION ADD-ON I need know understand this information to get the correct SKUs. Who can help me? Tks a lot.Solved2.2KViews0likes9CommentsBacking up Active Directory: V-79-57344-33928 - (AD LDS) database was not found.
Hello, We have this error from time to time, but it usually fixes itself without any end user intervention. However I am getting this error three nights in a row now on one of our domain controllers. This started happening on Wed morning, and continued through Friday morning. In all three instances the error message in the log is: Job ended: Thursday, October 29, 2009 at 1:18:54 AM Completed status: Failed Final error: 0xe0008488 - Access is denied. Final error category: Security Errors For additional information regarding this error refer to link V-79-57344-33928 Errors Click an error below to locate it in the job log Backup- \\dc1.domain.com\System?State V-79-57344-33928 - Unable to complete the operation for the selected resource using the specified options. The Active Directory, Active Directory Application Mode (ADAM) or Active Directory Lightweight Directory Services (AD LDS) database was not found. So I checked the selections and under the server in question, I can see System State > Active Directory > C:_WINDOWS_NTDS, and this is all checked off. I did a test Resource Credentials for everything in this backup and it all returnedsuccessfulso I'm at a loss. Under Settings > Microsoft Active Directory for this job properties we have all three boxes checked (GRC, Consistency Check, Continue if Consistency check fails.) Backup method is greyed out, but says Full - Back up entire Active Directory. We are using Symantec Backup Exec 12.5 for Windows Servers Media Server Version 12.5 Rev 2213 Administration Console 12.5 Rev 2213 Desktop and Laptop Option: Version 3.1 Rev. 3.41.32a Installed updates: Service Pack 2 Hotfixes: 324947 317436 325647 319242 324012 326004 323894 324011 Thanks for the help, we really do appreciate it!3.2KViews0likes11CommentsFirewall woes: Definitive TCP Port list for Netbackup
Hi, I keep running into problems connecting to clients/servers that have firewalls running. Does anyone have a COMPLETE portlist of TCP/UDP ports that should be open, so that I can do ALL possible Netbackup actions imaginable? We are using Netbackup 6.5.6 and 7.1 in a full Windows environment. I would like to put a generic firewall ruleset that is the sameon all clients, so that Netbackup will never everbe bothered by the firewalls again... Hope someone has this information available! Thanks! FredSolved577Views0likes3Commentsback up failed
I encountered this problem after the backup was done Completed status: Failed Final error: 0xe0000354 - Consistency check on Exchange objects cannot be performed because Backup Exec cannot find the required component CheckSGFiles.dll. Ensure that the Exchange Management Tools for Exchange Server is installed on the Backup Exec server. Final error category: Resource Errors For additional information regarding this error refer to linkV-79-57344-852I encountered this problem after the backup was done I couldn't find the solution online notethat the backup was done without any problems thanks1.2KViews0likes3CommentsThe question of MSEO Encryption and decryption
Hi all, I have a problem about the MSEO(media server encryption option). backup environment like below: DC SITE(MAST BACKUP SITE) Master server: SHAA2SNBU38 Media server:SHAA2SNBU38 first backup data to DD640,then vault to tape in i500. DR SITE(DISASTER RECOVERY SITE) Master server: SHAA2SNBU38(the same DC site master server) Media server: SHAA5SNBU61 backup type like DC SITE Now i have problem: Vault to tape is through encryption by mseo(media server of SHAA2SNBU38).Then i take the tape to DR site and recovery the tape from media server(SHAA5SNBU61) successfully.But the site of DR(SHAA5SNBU61) is out of mseo agent. why it does sucessfully? additional query:Recovery data what backup through MSEO must need media server installing MSEO agent?2.2KViews1like14CommentsHyper V guest only showing shares in resources
BE 2014 Sp 2 Host Hyper-V server 2012 with 4 server 2012 guests. All have the latest updates. All agents have been updated and are advertising to the backup server. 3 of the guests show all resources while the file serveronly shows the shares. No other resources are showing up. I would like to backup only the shares on the file server, but selecting the shares causes the job to fail with "resourses cannot be found" Credentials at the server level pass, but fail for the shares. Backing up the whole guest from the host works. On other servers I am able to chose the volume and select the shares from there. but on this server no volumes are showing up. The offending server also takes a long time to show the shares when editing the backup job (10 min) Am at a loss and would appreciate any and all help.Solved1.9KViews0likes7CommentsEnterprise Vault 10.0.3 downgrade assistance needed
Hello: We have EV 10.0.3 installed on Windows 2008 servers and have been having issues with the backups (BE 2012).I found a post about this yesterday andwould like to attempt to go back to 10.0.2 but thought I would ask first to see if anyone on the forums has tried this and what was the result. http://www.symantec.com/connect/forums/backup-exec-2012-does-not-support-enterprise-vault-1003-agent-backup Thanks!Solved2.4KViews0likes9Comments