Backup Exec 2012 cannot detect the Dell TL 2000 Media Changer
Dear All, I owned a backup exec 3600 appliance and have configured a tape out to Dell TL2000 tape library. recently the BE reported that one of the tape drive malfunctioned. and I got dell to replace the problematic drive. unfortunately the problem worsen ... now even the whole tape labrary (media changer) cannot be detected. I got the whole chasis and both tape drive replaced and still cannot detect the media changer ? what might be the issues? my backup exec isBackup Exec 2012 revision 1798Solved2.9KViews0likes9CommentsBackup exec appliance 3600 enable RDP
I am trying to RDP to the brand new backup exec appliance and as soon as I log in to the server it logs me off. I read some threads about needing to enable rdp via power shell and also saw some comments that only Symantec tech support can do that. How do I enable RDP?Solved2.3KViews1like2CommentsAbout changing the Backup Exec Service Account
Hi guys, I was trying to change the BESA from the default one. But since I failed to do so using the RemoteLaunch (Configuraton and Settings -> Backup Exec Services -> Edit Credentials), I tried the BEUtility. However, it was in vain with the errors below: Set server configuration started on list of servers. Setting configuration info for server: BACKUPSV01. Error: Failed setting configuration. Server:BACKUPSV01, service:BackupExecDeviceMediaService, err:0x421, 1057. Error: Failed setting configuration. Server:BACKUPSV01, service:BackupExecRPCService, err:0x421, 1057. Error: Failed setting configuration. Server:BACKUPSV01, service:BackupExecManagementService, err:0x421, 1057. Error: Failed setting configuration. Server:BACKUPSV01, service:BackupExecJobEngine, err:0x421, 1057. Error: Failed setting configuration. Server:BACKUPSV01, service:BackupExecAgentBrowser, err:0x421, 1057. Set server configuration completed with errors. Set server configuration operation has completed. Could anyone please help on it? Thanks in advance. P.S. I was adding a SAN storage, and it kept saying the default BESA doesn't have the read/write rights on that share. That's why I want to change the BESA to the one currently granted with access to the share.Solved2.1KViews1like8CommentsBackup Exec 2014 support for IP Less DAG protection Exchange 2013
Customer has implemented IP less DAG configuration of Exchange 2013 on CSV Hyper-V hosts W2K12R2 2 MBX nodes and now attempting to backup using BUE 2014. With no central management IP or DNS entry to use - what is the best method to add BUE protection of Exchange DAG Information Store. Posting here while i run some searches. Appreciate any links and feedback on options or 'not supported' even. Thanks JulesSolved2.1KViews3likes1CommentBE Appliance- DNS Configuration Issue
Hi, I am trying to run BE Appliance initial configuration, I have entered a static IP. But I don't have DNS Server or DHCP server , When I entered any DNS IP it give an error that the DNS server IP is incorrect or the server does not exist. And can't skip the DNS step. Any one can help ?Solved2KViews0likes9CommentsVery Disapointed
I have installed Backup Exec.Cloud on 3 computers so far I think the product needs lots of help, Mainly the rate at witch data is transferred. All 3 clients had good bandwidth (at least 5MBS up and 20 down) The uploads are taking way to long. This morning i installed a client and selected a folder with about 200 meg in it and 9 hours later it is 20% complete, The other 2 clients are just as slow. This product IS NOT ready for primetime.Solved1.7KViews0likes5Comments