BIOS is not ACPI compatible
Hello all, I've got a problem with the backup exec system recovery disc 2010. When I try to boot with the CD (on USB CD Drive) or USB Key, I have this message : Status: 0xc0000225 Info : Windows failed to load beacause the firmware (BIOS) is not ACPI compatible. A kb on symantec website tells to change the option in the BIOS but I don't have any option about ACPI. http://www.symantec.com/business/support/index?page=content&id=TECH57513 I found that the CD BESR is a Windows PE 2.5 (Vista). But the hardware which I try to restore isn't compatible with vista. Is there any solution for this problem like a Windows PE XP ? Thanks.
Error EC8F17B7 along with Error ED800012: (CRC Validation) is invalid & Error E4F3000E: Snapshot failure while using Volume Shadow Copy Service
Hi I am trying to backup a PC using SSR2013 (Desktop ed). I have created a custom backup job to run on schedule but the backup continuously fails. I find the following error in the event log afterwards: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\), (D:\). Error E4F3000E: Snapshot failure while using Volume Shadow Copy Service. Please check application event log for VSS errors. Error code: VSS_E_OBJECT_NOT_FOUND (-2147212536). (UMI:V-281-3215-6071) After running the job manually, I find the following in the event log: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\). Error ED800012: The internal structure of the recovery point file (CRC Validation) is invalid, damaged or unsupported. (UMI:V-281-3215-6071) I have been trying a few solutions found on the Symantec website regarding these errors, but have not received any good results. I have also not found a solution that relates to SSR2013... Thanks Zaid
Backup error details in Management Console
Hello Gentle people. I am running a Symantec System Recovery 2013 R2 for backing up Windows 7 computers. After backup is done in Symanatec Management Console if Igo to Reports > Backup and Recover > Backup Status of Managed Computers report it shows different status of the backup execution as shown below some showes At Risk some shows Need Attention etc... Now, If I use Symantec System Recovery 2013 R2 Console to check backup status it gives me more details such as why status is set to At Risk or Attention Needed as shown below Is there a way to view a detailed log(Reasons)details in Altiris Console? So, I can use that information for reporting purpose Any kind of help or a pointer is highly appreciated. Thank you.
SSR 2011 - VProConsole Error
Hi Community, wir versuchen es mal hier im Forum. Wir bekommen bei einem Kunden seit kurzer Zeit immer diese Fehlermeldung, wenn wir die Console starten wollen. Hier die Fehlermeldung: __________ Details Daten System.Collections.ListDictionaryInternal Innere Ausnahme Unbekannter Konfigurationsabschnitt "runtime". (C:\Program Files (x86)\Symantec\Symantec System Recovery\Console\VProConsole.exe.Config line 3) Meldung Das Konfigurationssystem konnte nicht initialisiert werden. Quelle System.Configuration Stapelverfolgung bei System.Configuration.ClientConfigurationSystem.EnsureInit(String configKey) bei System.Configuration.ClientConfigurationSystem.PrepareClientConfigSystem(String sectionName) bei System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName) bei System.Configuration.ConfigurationManager.GetSection(String sectionName) bei System.Configuration.PrivilegedConfigurationManager.GetSection(String sectionName) bei System.Diagnostics.DiagnosticsConfiguration.GetConfigSection() bei System.Diagnostics.DiagnosticsConfiguration.Initialize() bei System.Diagnostics.DiagnosticsConfiguration.get_IndentSize() bei System.Diagnostics.TraceInternal.InitializeSettings() bei System.Diagnostics.TraceInternal.get_Listeners() bei System.Diagnostics.Trace.get_Listeners() bei dotNetBase.TextLogger.StartListening() bei dotNetBase.TextLogger..ctor(TraceSwitch Switch, String AbsoluteLogFileName, Int32 MaximumLogFileSize) bei dotNetBase.TextLogger.InitInstance(TraceSwitch Switch, String AbsoluteLogFileName, Int32 MaximumLogFileSize) bei Symantec.VPro.VProUI.ProtectorUtils.InitDebugging(String sDebugFilename) bei Symantec.VPro.VProConsole.Program.Main(String[] args) Ziel-Site EnsureInit __________________ Reparatur des Programms hat keinen Erfolg gebracht. Windows- und Symantecupdates sind alle installiert. Hat vllt. noch jmd. ein paar Lösungsansätze oder gar Lösung parat? Danke im Voraus. :) Gruß Maaß IT
Symantec System Recovery 2013 r2 sp4 & Server 2008 r2 BSOD
I am backing up a Server 2008 R2 with Symantec System Recovery 2013 r2 sp4. The image backups fine. When we do a restore we get one of the following errors BSOD stop 7b, No operating system found, etc I have found this article on Microsoft and Veritas which talks about the C:\Boot files being located inside the image file. https://www.veritas.com/support/en_US/article.TECH125582 Within this article it talks about how it is backed up with the image of course, but when it is restored it is written twice: once by ASR Writer and then again by the image file with the end result of the GUID not matching. Here is Microsoft's explanation: https://support.microsoft.com/en-us/kb/2261423 So then if the C:\Boot is located in the image file to exclude it when you do a restore of the image. Unfortunately I have no luck in trying to find out how to exclude this on a restore or even during a disk-based backup. Has anyone been able to resolve this issue? I have and currently working with Veritas but do not have a resolution. Please let me know. Thank you.
Can't selected drives on selected computers
Hello everybody, I use product Symantec System Recovery 2013 Management Solution installed on server 2008 R2 SP1. I have several backups policy configured which run well.I didn't have this error before. But, I can not select the desired drived when I create a new backup policy. When I click on All drives on selected computers, It appears a blank page with error : ################################################################################ Symantec™ System Recovery 2013Management Solution An unexpected error has occurred in the application. Forfurtherdetails, see Altiris Log Viewer. ################################################################################ Thanks for your response Samir
System Recovery 2013 R2 Error E0BB00B5
Good Day to All, We are getting an snapshot error message and are scratchingour heads trying to firgure this out. The backup seems to fail only in the last second or 2. It only happends on one of volumes and not the 'C' drive. A restart does not help either and everytime we gerthis error message, we have to restart the "HyperV Virtual Machine Management Service" as the error stops the "Microsoft HyperV VSS Writer":We are running running Server 2012 R2. We have also degragedour disks and no errors are poping up. Any help is appreciated. The error message is, " Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (E:\). Error E0BB00B5: Snapshot error Error EBAB03F1: Following Operating System error occurred while performing requested operation: 'OS error 2147754806.'. (UMI:V-281-3215-6071) Details: Source: Symantec System Recovery "SSR 2013 R2 confusion
I make backups several times a week, I just deleted some old backup files thinking I wouldn't need them. When I try to recover a file, it says the file is deleted. And the file folder it is looking for is deleted, but shouldn't it be looking at the latest backup I made? Does SSR not backup all the files every time?