Recovering

1362 Topics

V-79-57344-33029 - Error - Mount failed.
The last 2 days I get the following error: Click an error below to locate it in the job log V-79-57344-33029 - Error - Mount failed. Invalid Physical Volume Library Media Identifier. V-79-57344-33029 - Unable to acquire device for the specified pool and media The backup to Disk is running fine, but I can't copy them to tape. Also restoring from the disk is not possible. I restarted all backup exec services, but with no luck. Anybody an idea what is going wrong here? Running backup exec 2012 with sp1. The problem only occurs with the VM backup's, the normal Win 2003 backup's trought the agent are running fine.
Solved
Thunnissen
12 years ago Place Backup Exec
9.6KViews
0likes
8Comments
BE catalogs directory is too large
the free space of disk C become more and more smaller in recentery month. i found catalogs directory(path: C:\Program Files\Symantec\Backup Exec\Catalogs) is about 3GB, maybe a little large. could i deleted the old .fh and .xml file in the catalogs directory directly? is there any problem if i delete the old data? backup exec version: 2010 r2
Solved
bellez
12 years ago Place Backup Exec
9.4KViews
3likes
8Comments
How to set overwrite backup to preventing full disk space?
Hi! I'm using a Backup Exec 2012 Version 14.0 Rev. 1798 (64-bit), and have configured with the following (capture) schedule : When I check the storage, capacity of disk is low becausethe backup process does not overwritten previouslydata. How I can to set overwrite backup to preventing full disk space? Can I deleting the old data manually? Best Regards, Barkah
Barkah_MLPT
12 years ago Place Backup Exec
7.1KViews
1like
5Comments
install backup exec agent on windows 10
hi all i have on my enviroment machineworked on windows 10,and i need to backup huge data from this machine, i tried to installagent for symantec backup exec agent,itfailed manytimes.i review the compatability for windows 10 with symantec backup exec 2014 and i found that symantec backup exec not support this operating system,is there any way to install agent to this machine and take backup from it.there is sensetive data on this machine. thak you for patient
Solved
Ramzi_Sehwail
9 years ago Place Backup Exec
6.7KViews
0likes
5Comments
Catalog returns No Backup Sets - need to recover data from tape
Have a situation where we had BE 2010 running on a server and it crashed. In recovery process we had to load BE 2012. We have an HP LTO 4 Autoloader 1/8 and had to run a catalog on the tapes to rebuild the backup sets. There is one tape that is critical and it it is not reading any backup sets on it, when we know for certain it does. This tape has data we need to recover, yet catalog shows it as empty. What are my options to force a read of this tape and be able to recover data off it? Much appreciated on help provided!
Solved
David_Greenwell
12 years ago Place Backup Exec
6.3KViews
0likes
9Comments
Backup Exec 12.5 with very large Catalogs folder
Hi all, I am running Backup Exec 12.5 and currently the Catalogs folder is about 42GB. Is there any properly ways of trimming this folder down to a smaller size? Thank you very much for your help.
Solved
hello0001
12 years ago Place Backup Exec
6.3KViews
6likes
5Comments
List Tape Contents (Symantec BackupExec 12.5)
hi guys, i'm on the task of recovering old datas from old tapes. I can read the tape contents using Symantec Backup Exec, by doing Inventory, and going to the device then clicking on the tape device name. When I do a restore data, I can view the contents of the tape. My question is, is there a way to list the contents of the tape to an excel file or text format? I had downloaded the Catdump utility for Backup Exec 12.5 from this link--> (http://www.symantec.com/business/support/index?page=content&id=TECH87173) The syntax for this catdump would be: catdump path-to-program-files-and-catalog-GUID.fh > dump-to-text.file But my problem is when I tried to run that command, there's no data generated becaused the catalog.GUID.fh file does not exist anymore, or it might have been deleted. Is there a way to print or list out the tape contents from old tapes if the catalog file has been deleted?
Solved
JJJCR
12 years ago Place Backup Exec
5.9KViews
1like
17Comments
Exchange GRT restore - Unable to open the item Database - skipped.
Exchange 2010 restore fails with "0xe00003bf - Cannot open one or more mail messages because of unknown Exchange Web Service errors" Environment: Exchange 2010 DAG - 1 active copy, 1 passive copy 2 servers with CAS role - NLB The backup with GRT enabled works just fine, but I tried to restore an email to test and it failed: Job Completion Status Job ended: Friday, February 14, 2014 at 2:51:23 PM Completed status: Failed Final error: 0xe00003bf - Cannot open one or more mail messages because of unknown Exchange Web Service errors. Review the job log for more information. Final error category: Resource Errors For additional information regarding this error refer to link V-79-57344-959 Errors Click an error below to locate it in the job log V-79-57344-959 - Unable to open the item Database - skipped. V-79-57344-959 - Unable to open the item Database - skipped. V-79-57344-959 - Unable to open the item Database - skipped. Regarding this error, I found the following TN: http://www.symantec.com/docs/TECH190749 But, I tried both solutions and it still doesn't work: Restore redirect to the CAS server and Add in the host file the hostname and IP address Does anyone have any ideas about what else it could be? Media server is Backup Exec 2012 SP3, in fact it is the appliance 3600 R2.
mmeeggaann
11 years ago Place Backup Exec
5.5KViews
2likes
14Comments
install failed with error code 1603
Hi, When taking image backups i am getting the particular error. Even the Full Image backups doesnt work. Image Backups-Incremental Image Backups-Daily -- The job failed with the following error: Incremental\\Differential backup methods are not supported for this VM. The backup job failed, since the option 'to fall back to a full backup' was not selected. I logged a case with Symantec support and they said each VM should have an agent installed whether you need to take a GRT backup or just an image backup. Secondly they said all VMs must have hardware version7 inorder to do an incremental backup inorder to allow change block tracking feature within VMware. As a first step I am trying to push the RAWS agent to each VM. While installing agents on some VMs i am getting the following error 'install failed with error code 1603' I checked firewall settings and they are disabled. Thanks!
Solved
zak2011
13 years ago Place Backup Exec
5.5KViews
1like
4Comments
Backup Exec 2012 compatibility with Windows Server 2012 and 2012 R2
Hi, We have a bunch of servers running Windows Server 2008 R2, one of which is our BE 2012 SP4media server. We also have several Windows Server 2012, one running as aDC ie AD/DHCP/DNSand another running Exchange Server 2010 SP3. And we also have a bunch of Windows Server 2012 R2 running as SQL servers and various other applications,Microsoft Business Dynamicsetc Currently we have the BE 2012 SP4 backing up all of them onto Ultrium tape and it seems to be working OK regards targetting the servers and backing them up via agents. I am aware though that BE 2012 SP4 doesn't support Windows Server 2012 R2. Where am I going to come unstuck regards wanting to do recovery of these servers ? Will I be able to do a bare metal restore for the Windows Server 2012 DC and Exchange Server from the BE 2012 SP4 server ? Can I do anything other than flat file restore via the agents on the Windows Server 2012 R2 boxes ? Seems that Symantec seem to have been in the wilderness this last year or so regards Windows Server 2012 R2 ? I see that there is now BE 2014 and also that there is now a BE 15 just released. Am I really going to need to upgrade to these products if I want to do full server recovery for all of my servers ? Mike.
Solved
Stylax
10 years ago Place Backup Exec
5.2KViews
0likes
2Comments