Forum Discussion

mdmasih_P1's avatar
mdmasih_P1
Level 4
11 years ago

Backup Exec 2012 Compatible

Hi All,

 

Does the Backup Exec 2012 Support the below eniroment? The Server 1 and Server 2 are clustered

1.       Memex Application Server  & Memex Process and Integration Server – Active
·         One Server Blade Type with 4 CPU's
·         Full Height Blade Server
·         4 x 10 Cores with Total 40 Cores (2.4 GHz)
·         160 GB RAM
·         2 x 600 GB SAS10K Drives RAID1
·         Dual 10G Flex Network Card
·         Dual SAN HBA card 8 Gb
·         SuSE Linux 4 Sockets Physical License
·         VMware VSphere 4 Sockets – Clustered on VM Level  
 
2.       Memex Application Server  & Memex Process and Integration Server – Passive
·         One Server Blade Type with 4 CPU's
·         4 x 10 Cores with Total 40 Cores (2.4 GHz)
·         160 GB RAM
·         2 x 600 GB SAS10K Drives RAID1
·         Dual 10G Flex Network Card
·         Dual SAN HBA card 8 Gb
·         SuSE Linux 4 Sockets Physical License  
·         VMware VSphere 4 Sockets – Clustered on VM Level
 
3.       Memex Management Client Deployment Server & 3 DI Components (SAS Meta Data+ SAS Middle tier + SAS DI) – Standalone (No HA)
·         One Server Blade Type with 4 CPU's
·         4 x 10 Cores with Total 40 Cores (2.4 GHz)
·         160 GB RAM
·         2 x 600 GB SAS10K Drives RAID1
·         Dual 10G Flex Network Card
·         Dual SAN HBA card 8 Gb
·         SuSE Linux 4 Sockets Physical License  
·         VMware VSphere 4 Sockets
·         Windows 2008/2012 Standard Edition for Click One Partition
 
4.       Operational Database Servers – two Standalone Servers ( database Oracle)
·         Two Servers  Blade BL460 Gen8   each with 1 CPU's  3.3 GHz  can be upgradable to 2 CPU's each
·         Half HeightBlade Server
·         1 x 4 Cores with Total 8 Cores per Two Servers
·         Each server with 32  GB RAM
·         2 x 600 GB SAS10K Drives RAID1
·         Dual 10G Flex Network Card
·         Dual SAN HBA card 8 Gb
·         Linux HP RHEL Srv 2 SKT 4 Gst
2012
Agents
Backing Up
Backup and Recovery
Backup Exec
Licensing
Linux
  • CraigV's avatar
    CraigV
    11 years ago
    Vsphere 4 should be on there under the section for virtualization. If your version is not on the SCL, i would assume it is either too old, or too new. Your version appears to be newer than those you listed, and if not on the SCL is untested. Maybe add in an Idea for your version to be supported. Thanks!
  • CraigV's avatar
    CraigV
    Moderator
    11 years ago

    Hi,


    Check the BE 2012 SCL below...this will detail the versions of Linux you have that are supported.

    http://www.symantec.com/business/support/index?page=content&id=TECH175581

    The hardware shouldn't be an issue from a server-make perspective, and likewise the server configuration.

    However, your media server MUST be Windows-based. Also be aware that BE 2012 won't install on Windows Server 2012 (R1 or R2) as a media server...you'd need to run Windows Server 2008 R2, although this is going to be addressed with the Beta for BE 2012 R2.

    Thanks!

  • mdmasih_P1's avatar
    mdmasih_P1
    Level 4
    11 years ago

    Hi Craig,

    I checked the Document and for SUSE it supports for Ext 2, Ext 3, Reiser FS, JFS, VxFS and does not mention anything for ext4 or it it end of life?

    Please advice also on VMware VSphere 4?

    Thanks

  • CraigV's avatar
    CraigV
    Moderator
    11 years ago
    Vsphere 4 should be on there under the section for virtualization. If your version is not on the SCL, i would assume it is either too old, or too new. Your version appears to be newer than those you listed, and if not on the SCL is untested. Maybe add in an Idea for your version to be supported. Thanks!