Forum Discussion
Dear Colin,
Thank you for your answer.
The port 12000 is open on the linux machine (telnet from the mediaserver to the linux machine is ok)
The port 6101 is open on the mediaserver (telnet from the linux machine to the mediaserver is ok)
But for some reasons the Linux Agent seem to not use the port 6101 at all. I have used a tcpdump command on the linux machine to track if something use the 6101 (on both sides) but when irestart the backup exec services nothing goes through that port, so the mediaserver use the 10000 instead of 12000.
Then i have tried to set a NAT rules on the linux machine changing the incoming port to the 12000 and in this way it works like a charm. However this is a very rough solution.
In reference at this article: http://www.symantec.com/docs/TECH37415 i can't find the file agent.init and i suspect that this coult be the very issue. I only have the file VRTSralus.init.
For the deployment of the agent i've used the file RALUS_RMALS_RAMS-1798.17.tar.gz that i've found in the LinuxUnixMac folder inside the BackupExec CD, it is correct?
Thanks again,
Davide