Forum Discussion

Marius_Gordon's avatar
Marius_Gordon
Level 4
10 years ago

Failover for VCS Global Cluster

Failover for VCS Global Cluster   Setup: Veritas Storage foundation HA for Windows v6.1 Single node Local cluster Single node Remote cluster Data replicated between clusters via VVR...
business continuity
Cluster Server
Configuring
Tip-How to
Windows Server (2003-2008)
  • Wally_Heim's avatar
    Wally_Heim
    10 years ago

    Hi Marius,

    The default ClusterFailoverPolicy is Manaul.  This means that site failover does not happen unless the GCO administrator says that it is OK. 

    I've recommended changing this setting to "Connected" in the past with a few customers in similar situations as your.  By setting the policy to "Connected" failover between sites will happen if the global service group has failed on all nodes in the production site, and the GCO heartbeat is in an Alive/Running state.  This should allow a VVR migrate to be done and leave little chance for data loss.

    If you set the policy to "Auto" then site failover will happen when the global servcie group fails on all nodes in the production site.  Site failover will also happen anytime that the GCO heartbeat has an issue.  This can lead to situations where the global service group is online on both sites at the same time.  This can lead to data loss.  It is not recommended to run with the ClusterFailoverPolicy set to "Auto" because of the potentical for data loss.

    I hope this helps you set the ClusterFailoverPolicy to the correct settings to meet your needs.  Please let us know if you have any other questions.

    Thank you,

    Wally

Wally_Heim's avatar
Wally_Heim
Level 6
10 years ago

Hi Marius,

The default ClusterFailoverPolicy is Manaul.  This means that site failover does not happen unless the GCO administrator says that it is OK. 

I've recommended changing this setting to "Connected" in the past with a few customers in similar situations as your.  By setting the policy to "Connected" failover between sites will happen if the global service group has failed on all nodes in the production site, and the GCO heartbeat is in an Alive/Running state.  This should allow a VVR migrate to be done and leave little chance for data loss.

If you set the policy to "Auto" then site failover will happen when the global servcie group fails on all nodes in the production site.  Site failover will also happen anytime that the GCO heartbeat has an issue.  This can lead to situations where the global service group is online on both sites at the same time.  This can lead to data loss.  It is not recommended to run with the ClusterFailoverPolicy set to "Auto" because of the potentical for data loss.

I hope this helps you set the ClusterFailoverPolicy to the correct settings to meet your needs.  Please let us know if you have any other questions.

Thank you,

Wally