SYMAJ
12 years agoLevel 6
5220 Appliances - Buffer Tuning & Throughput
Does anyone have any experience of tuning throughput on a 5220 Appliance ?
I note that the data buffers are set to 262144 (standard setting) and there are 30 of them. Are you finding that these re...
- 12 years ago
You can change the buffer sizes from the CLISH (or drop into the O/S and add the usual touch files)
I would set the SIZE_DATA_BUFFERS to 256kb (262144) but when doing this also set the SIZE_DATA_BUFFERS_DISK to what ever value you want (1048576 usually works OK), otherwise they will both use this setting - same goes for the number of buffers.
You can enable and disable compression when ever you like - but I would start with it disabled and see how it goes.
The 2.5.1b update is identical to the 2.5.1 update - only the installer has changed so you can take into account any feedback that has already been provided from that one so far.
Hope this helps