Forum Discussion

DPeaco's avatar
DPeaco
Moderator
5 years ago

NetBackup EEB Listing

Is there a way via command line to get a list of current EEBs installed on an appliance? NBU 5230 running 3.2/8.2 I'm looking for a way to automate the check / listing of installed EEBs.
  • DPeaco's avatar
    DPeaco
    5 years ago

    OK, I found it and it works.

    If you are doing this command line? This is what you run to get the list of EEBs installed on your NBU appliance:

    /opt/NBUAppliance/scripts/patch.pl --list=eebs

DPeaco's avatar
DPeaco
Moderator
5 years ago

OK, I found it and it works.

If you are doing this command line? This is what you run to get the list of EEBs installed on your NBU appliance:

/opt/NBUAppliance/scripts/patch.pl --list=eebs

  • jnardello's avatar
    jnardello
    Moderator
    5 years ago

    Or not worry about whether they're going to change the command on you the next time you upgrade, and just run "rpm -qa | grep EEB"

    Same output. =)

    $ ssh -qtt myappliance "rpm -qa |grep EEB"
    NBAPP_EEB_ET3981134-3.2.0.0-10.x86_64
    NBAPP_EEB_ET3990855-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3983638-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3983739-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3991667-3.2.0.0-2.x86_64
    NBAPP_EEB_ET3990516-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3986342-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3987003-3.2.0.0-1.x86_64
    $

    $ ssh -qtt myappliance "sudo /opt/NBUAppliance/scripts/patch.pl --list=eebs"
    List of installed EEBs:
    NBAPP_EEB_ET3981134-3.2.0.0-10.x86_64
    NBAPP_EEB_ET3983638-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3983739-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3986342-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3987003-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3990516-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3990855-3.2.0.0-1.x86_64
    NBAPP_EEB_ET3991667-3.2.0.0-2.x86_64
    $