Forum Discussion

EvenHornfelt's avatar
EvenHornfelt
Level 4
3 years ago

NetBackup Flex Appliance WORM repl./AIR?

Hello, deploying (2x) FlexOS 2.1, NBU 9.1.0.1 , Master, Media MSDP, AIR ok but using WORM storage shows everyting ok on source side, but no import job and nothing get catalogized on target side. Anyone seen this or got AIR working using WORM?

  • EvenHornfelt's avatar
    EvenHornfelt
    3 years ago

    Finally! after working with support.....trying to fix, then trying to remove, and finally configurated again. Now on versions Flex OS 2.1, NetBackup 10.0, Worm server 16.0......some differences in wizards..... testing...and OK.

    (not able to pinpoint what went wrong.)

3 Replies

Sort By
  • davidmoline's avatar
    davidmoline
    Level 6
    3 years ago

    Hi EvenHornfelt 

    Firstly, I've not done this, but WORM only changes how retention within the pool behaves, everything else should operate similar to normal MSDP. The main difference between the two setup is that the WORM storage server is not a media server, so will require one at each end to facilitate the operations. 

    Have a review of thes two articles which may describe the behaviour you observe (and solutions):
    https://www.veritas.com/content/support/en_US/article.100050294.html
    https://www.veritas.com/content/support/en_US/article.100051154.html

    Cheers
    David

    • EvenHornfelt's avatar
      EvenHornfelt
      Level 4
      3 years ago

      Hi, yes, we have found the two articles. Kind of similar, but not same. Strange behaviour. -> support case...

      Even.

  • EvenHornfelt's avatar
    EvenHornfelt
    Level 4
    3 years ago

    Finally! after working with support.....trying to fix, then trying to remove, and finally configurated again. Now on versions Flex OS 2.1, NetBackup 10.0, Worm server 16.0......some differences in wizards..... testing...and OK.

    (not able to pinpoint what went wrong.)