Forum Discussion

fjacquet94250's avatar
fjacquet94250
Level 2
12 years ago

Replication Failed

I think I have the same with NBU5200  2.5.2 ( so NBU 7.5.0.5 ) same message for me

 

Another regression ?

 

28.03.2013 06:52:04 - requesting resource LCM_stu_disk_chback01
28.03.2013 06:52:04 - granted resource LCM_stu_disk_chback01
28.03.2013 06:52:05 - started process RUNCMD (25479)
28.03.2013 06:52:05 - requesting resource @aaaad
28.03.2013 06:52:05 - reserving resource @aaaad
28.03.2013 06:52:06 - reserved resource @aaaad
28.03.2013 06:52:06 - granted resource MediaID=@aaaad;DiskVolume=PureDiskVolume;DiskPool=dp_disk_chback01;Path=PureDiskVolume;StorageServer=chback01;MediaServer=chback01
28.03.2013 06:52:07 - Info bpdm(pid=25492) started            
28.03.2013 06:52:07 - started process bpdm (25492)
28.03.2013 06:52:09 - Critical bpdm(pid=25492) get image properties failed: error 2060013: no more entries    
28.03.2013 06:52:09 - Error nbreplicate(pid=25479) ReplicationJob::Replicate: Replication failed for backup id LSFP01_1364425226: media open error (83)  
28.03.2013 06:52:09Replicate failed for backup id LSFP01_1364425226 with status 83
28.03.2013 06:52:09 - end operation
media open error(83)

#Moved to its own thread for you# from https://www-secure.symantec.com/connect/forums/duplications-fail-media-open-error83

Backup and Recovery
NetBackup Appliance
Troubleshooting
  • Mark_Solutions's avatar
    Mark_Solutions
    12 years ago

    I have opened this thread for you so that your particular issue can be looked into.

    Please take a look at your appliance - the one that this images is trying to replicate from.

    Go into the O/S (from the CLISH go to Support and then Mainetenance, login with yoru password - default is P@ssw0rd - type elevate to get into the O/S)

    cd to /disk/databases/catalog/2/

    Look for LSFP01 and see if it only appears once or if you have 2 directories for that client in both upper and lower case.

    If it only appears once then run the following - this assumes that the lower case one exists only:

    ln -s /disk/databases/catalog/2/lsfp01 /disk/databases/catalog/2/LSFP01

    You should then see both directories which have the same contents via the link that has been setup

    The replication may well then work so let me know if this resolves it.

    If you already have both directories then you need to make a copy of  both directories (to be on the safe side) and then move all files and folders in the Upper case one - for all sub directories - into the lower case one and then remove the upper case folder before you can run the ln -s command

    Let me know if this helps

3 Replies

Sort By
  • Mark_Solutions's avatar
    Mark_Solutions
    Level 6
    12 years ago

    I have opened this thread for you so that your particular issue can be looked into.

    Please take a look at your appliance - the one that this images is trying to replicate from.

    Go into the O/S (from the CLISH go to Support and then Mainetenance, login with yoru password - default is P@ssw0rd - type elevate to get into the O/S)

    cd to /disk/databases/catalog/2/

    Look for LSFP01 and see if it only appears once or if you have 2 directories for that client in both upper and lower case.

    If it only appears once then run the following - this assumes that the lower case one exists only:

    ln -s /disk/databases/catalog/2/lsfp01 /disk/databases/catalog/2/LSFP01

    You should then see both directories which have the same contents via the link that has been setup

    The replication may well then work so let me know if this resolves it.

    If you already have both directories then you need to make a copy of  both directories (to be on the safe side) and then move all files and folders in the Upper case one - for all sub directories - into the lower case one and then remove the upper case folder before you can run the ln -s command

    Let me know if this helps