Forum Discussion

raj08's avatar
raj08
Level 4
12 years ago

Automate Media Unfreeze

Hi All,

 

I am thinking of automating Media Unfreeze in our environment. There are couple of questions regarding this.

 

1. "/usr/openv/netbackup/bin/goodies/available_media | grep -i FROZEN" will give the forzen tapes. But this command is taking long time to complete. In our environment its taking around 20 minutes. Is it normally works this way? If yes, is there any other command which gives me the frozen medias?

 

2. What is the best way to find the media host of a particular media? "bpmedialist -m <media_id>" is not helping. Because in our environment some media are allocated to Server Group. Hence for some media, instead of "Server Host" output, I get "Server Group" output in bpmedialist command?

Will "bpmedia -unfreeze -m <media_id> -h <Server Group> works? or only "Server Host" will work? If the second is the answer, what is the other command to find the media host?

 

My Master Server : HP-UX 11.31

Netbackup Version: 7.1

I know instead of these, GUI or from Opscenter, it is easy to unfreeze media. But I would like to know if an automation with out any manual interaction is possible. Thanks in advance for your inputs. :)

..RAJ

7.1.x and Earlier
Backup and Recovery
Basics
NetBackup
  • Marianne's avatar
    Marianne
    12 years ago

    Not a good idea to automate this.

    There are many reasons why media gets frozen. 
    Rather spend energy finding the reason and eliminate it.

    Unfreezing faulty media 'automatically' serves no purpose.

8 Replies

Sort By
  • Marianne's avatar
    Marianne
    Level 6
    12 years ago

    Not a good idea to automate this.

    There are many reasons why media gets frozen. 
    Rather spend energy finding the reason and eliminate it.

    Unfreezing faulty media 'automatically' serves no purpose.

  • Andy_Welburn's avatar
    Andy_Welburn
    Level 6
    12 years ago

    Unfreezing faulty media 'automatically' serves no purpose.

     

    ... except for making said media available again & subsequently frozen again with the added joy of potentially damaging your drive(s).

     

    spend energy finding the reason and eliminate it

    yesyesyes

  • mph999's avatar
    mph999
    Level 6
    12 years ago

    I agree with the above.

    Media should NEVER be unfrozen unless you can prove why it was frozen.

    Bad tapes can damage drives, yes, this really does happen.  I saw one case where x6 tapes drives were broken because bad media kept being unfrozen and put back into them.  Rare - yes, impossible - no.

    Additionally, media should not be manually frozen to save images, the experation time should be increased to do this, of the media hold feature of 7.5 used.

    Martin

  • revarooo's avatar
    revarooo
    Level 6
    12 years ago

    Think of frozen media as potentially a damaging tool such as a hammer. Think of the tape drive as a washing machine, put the hammer in the washing machine again is going to ruin the drum.

    (Bad tape = ruined tape drive)

    Solution, remove the bad frozen media.

    Of couse, frozen media may not be defective tapes, there may be another reason why they are frozen.

    As the others have already mentioned, automatically unfreezing media is a BAD BAD idea.

     

  • revarooo's avatar
    revarooo
    Level 6
    12 years ago

    Indeed. clothes = clean tape ; hammer = bad tape

    you understand the analogy ;)

  • raj08's avatar
    raj08
    Level 4
    12 years ago

    Understood & Agreed. Thanks Marianne, Martin, Andy & Reveroo. Washing machine analogy is Interesting. :)

     

    ..RAJ

  • D_Flood's avatar
    D_Flood
    Level 6
    12 years ago

    Instead of automatically unfreezing, may I suggest that automating (through a DOS or Shell Script) the following command might be more in order?  This way the reason for the freeze might be more obvious.

     

    BPERROR -problems -t MEDIADEV -M %MASTER% -hoursago %HOURS% -L

     

    Since that's a quote from one of my DOS scripts (Windows Masters) it obviously is set up for some variable substitution but you get the idea.