cannot connect to robotic software daemon (42)
Hi,
We've got a problem with our tape library due to a power failure, and requires a robot replacement.
After the change, both drives in one media server are down and returning an error:
...
Thank you guys for your help. Luckily, I've managed to bring up the drive in db01.
root@master:~# vmoprcmd HOST STATUS Host Name Version Host Status ========================================= ======= =========== master.domain.com 760200 ACTIVE pp-db02.domain.com 760200 ACTIVE pp-db01.domain.com 760200 ACTIVE PENDING REQUESTS <NONE> DRIVE STATUS Drive Name Label Ready RecMID ExtMID Wr.Enbl. Type Host DrivePath Status ============================================================================= HP.ULTRIUM6-SCSI.000 No No No hcart3-Clean master.domain.com /dev/rmt/0cbn TLD pp-db02.domain.com /dev/rmt/0cbn SCAN-TLD pp-db01.domain.com /dev/rmt/0cbn TLD HP.ULTRIUM6-SCSI.001 Yes Yes 0017L6 0017L6 Yes hcart3-Clean master.domain.com /dev/rmt/1cbn TLD pp-db02.domain.com /dev/rmt/1cbn SCAN-TLD pp-db01.domain.com /dev/rmt/1cbn ACTIVEThough I'm not sure 100% what make this up. What I did:
1. Reboot the master server
2. Reboot the tape library
After the reboot, drive in db01 is still down. What I tried is to manually bring up the path in the GUI:
Media and Device Management > Device Monitor > Select the drive. From the drive list (pp-db01), right click and click “Up Path”.
