Aurelien59
7 years agoLevel 4
Can't start BMR Restore ("no network interfaces were discovered")
Hi all, Here is my problem : Client is HP Prodesk 600 G2 SFF, backed up successfully with 8.0 version. I have got 2 differents BMR bootable ISO (each on bootable USB keys). First comes from ...
- 7 years ago
The error code 58 is well-known. There are technotes specific to BMR https://www.veritas.com/support/en_US/article.100023265 but also check this https://www.veritas.com/support/en_US/article.100020482
- 7 years ago
Network connection is missing. This is whay you get status 5.
20 avr. 2018 09:42:08 - Info bpbrm (pid=7400) connect failed STATUS (18) CONNECT_FAILED 20 avr. 2018 09:42:08 - Info bpbrm (pid=7400) status: FAILED, (42) CONNECT_REFUSED; system: (10060) Connection timed out.; FROM 0.0.0.0 TO PC-RESTORE-JO 123.8.50.40 bpcd VIA pbx 20 avr. 2018 09:42:08 - Info bpbrm (pid=7400) status: FAILED, (42) CONNECT_REFUSED; system: (10060) Connection timed out.; FROM 0.0.0.0 TO PC-RESTORE-JO 123.8.50.40 bpcd VIA vnetd 20 avr. 2018 09:42:08 - Info bpbrm (pid=7400) status: FAILED, (42) CONNECT_REFUSED; system: (10060) Connection timed out.; FROM 0.0.0.0 TO PC-RESTORE-JO 123.8.50.40 bpcd 20 avr. 2018 09:42:08 - Error bpbrm (pid=7400) Cannot connect to PC-GA2-JXZN-2 20 avr. 2018 09:42:09 - Info tar32 (pid=0) done. status: 58: can't connect to client
Adding of drivers should be done on the master server, there are two tech notes describing this: