Forum Discussion

Dany54000's avatar
Dany54000
Level 4
9 years ago

HP ULTRIUM5-SCSI DRIVE IN "DOWN-TLD" STATUS ON NETBACKUP

Hi all I am experiencing a DRIVE's issue with netbackup since I've changed the SFP component. I have a backup server (Hp ProLiant DL360p Gen8) with "PCIe 3.0 Low Profile x8" card. The backup...
Backup and Recovery
NetBackup
  • jim_dalton's avatar
    jim_dalton
    9 years ago

    Confused...you have one robot and one drive yet tpconfig says you have two robots and two drives one pair of which is a bit duff. I'd delete the stunits, all drives, all robots, start from scrach, ensure theres one and only one of each at the OS (assuming thats the real number you have) and then and only then recreate netbackup devices, stunits.jim

Will_Restore's avatar
Will_Restore
Level 6
9 years ago

rport-2:0-0: blocked FC remote port time out: removing target and saving binding

Certainly looks like Linux message above. 

Run 'scan' command to confirm you can see drive and changer.

If that's good then try Device Configuration Wizard to confirm it also sees the devices.