Forum Discussion

Nithin_T_N's avatar
Nithin_T_N
13 years ago

media ID not unique in database (34)

Processing new media added to the robotic library by logically adding media with new media IDs as follows...  Media ID Slot  ======== ====   Update failed: could not add new media I...
7.1.x and Earlier
Backup and Recovery
NetBackup
  • Mark_Solutions's avatar
    Mark_Solutions
    13 years ago

    First off the Media ID says V410L3 which i would expect to be wrong

    On that version of NetBackup the Media ID Generation rules are unique to each admin console (and possibly to each user)

    I would expect it to be, say ABV410

    It suggests it has seen this tape before and knows its bar code is ABV410L3

    So, go to Inventory the library - tick the advanced button and go to the Media ID Generation tab.

    For the robot number involved add a new rule which says the library has a length of 8 and a rule of 1:2:3:4:5:6

    OK back to the inventory screen and try again

    If it still doesnt work then search your media for something with the same bar code and see what the Media ID is of that one and get back to us

Marianne's avatar
Marianne
Level 6
13 years ago

First of all, check current status:

/usr/openv/volmgr/bin/vmquery -m V410L3

Please post output.

Mark is right - NBU stores the last 6 characters of the label. If you have been using AAV410L3 and now trying to add ABV410L3 (for example) the last 6 characters are both V410L3, causing the 'not unique' error.

It will be a problem to try and change now, since all your tapes have been written using last 6 instead of 1st 6.

Based on output above and inspection of new label, we can hopefully figure something out...