Missing drive path
*** Moved to new discussion from https://www-secure.symantec.com/connect/forums/missing-drive-path-2 ***
Sorry for bypassing the post. I am even facing the same issue.
I have one robot and two ...
OneCommand/HBAnyware for Emulex, on *NIX system there often are a .conf file where you can do the persistent binding too. Might be called persistent naming for some *NIX systems
The steps are
1. Identify the tape drive(s) WWN(s)
2. Setup the persistent binding on the HBA(S) for the tape drive(s) WWN(s)
3. Reboot
4. Check that the tape drive keeps the assigned SCSI ID(s)
