NetBackup (erreur 96)

Question

Bjr à tous, j'ai des problèmes pour créer une politique de sauvegarde valide sur des bandes LTO 3. En fait j'ai une TS3100 installée sur win 2003 serveur R2, 32bit et Veritas NetBackup comme logiciel de sauvegarde. les sauvegarde sur disques, (donc des postes clients vers les disques dures du serveur de backup se passent sans problème).Mais les sauvegarde vers la TS3100 donc vers les bandes LTO posent problème, l'erreur 96 revient toujours. Si une personne à une solution, une procédure claire pour configurer Veritas NetBackup qu'il m'aide.

Merci

Merci

andy_welburn · Accepted Answer

In-depth Troubleshooting Guide for Exit Status Code 96 in NetBackup Server (tm) / NetBackup Enterprise Server (tm) 6.0
http://seer.entsupport.symantec.com/docs/278555.htm

marianne · Answer

Hello all, I have problems to create a valid backup policy on LTO 3. In fact I have a TS3100 installed on win 2003 server R2 32bit and Veritas NetBackup as backup software. the backup disk (hence the client to the server hard disk backup pass without problem). But then saved to the TS3100 to the LTO problem, error 96 keeps coming back. If a person to a solution, a clear procedure to configure Veritas NetBackup that helps.

Thank you

Thank you

marianne · Answer

Check all densities in Device Config, Media and Storage Unit.
Example from our lab:

# bpstulist -L

Label:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; media1-hcart2-robot-tld-1
Storage Unit Type:&nbsp;&nbsp;&nbsp; Media Manager
Host Connection:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; media1
Number of Drives:&nbsp;&nbsp;&nbsp;&nbsp; 1
On Demand Only:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; no
Density:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; hcart2 (14)
Robot Type/Number:&nbsp;&nbsp;&nbsp; TLD (8) / 1
Max Fragment Size:&nbsp;&nbsp;&nbsp; 5000
Max MPX/drive:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 4

# tpconfig -l
Device Robot Drive&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Robot&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Drive&nbsp;&nbsp;&nbsp;&nbsp; Device&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Second
Type&nbsp;&nbsp;&nbsp;&nbsp; Num Index&nbsp; Type DrNum Status&nbsp; Comment&nbsp;&nbsp;&nbsp; Name&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Path&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Device Path
robot&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp; TLD&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /dev/sg/c1t0l0
&nbsp; drive&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp; 0 hcart2&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; UP&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Drive000&nbsp; /dev/rmt/0cbn

# vmquery -a -bx
media&nbsp;&nbsp; media&nbsp;&nbsp;&nbsp;&nbsp; robot&nbsp; robot&nbsp; robot&nbsp; side/&nbsp; volume&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; optical&nbsp; # mounts/&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; last&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; assigned&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; pool
&nbsp;ID&nbsp;&nbsp;&nbsp;&nbsp; type&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; type&nbsp;&nbsp;&nbsp;&nbsp; #&nbsp;&nbsp;&nbsp; slot&nbsp;&nbsp; face&nbsp;&nbsp; group&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; partner&nbsp; cleanings&nbsp;&nbsp;&nbsp;&nbsp; mount time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; time
---------------------------------------------------------------------------------------------------------------------------
A00000&nbsp; HCART2&nbsp;&nbsp;&nbsp; TLD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp; 000_00001_&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2&nbsp;&nbsp;&nbsp;&nbsp; 08/18/2010 17:16&nbsp; 08/18/2010 17:07&nbsp; NetBackup&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;
A00001&nbsp; HCART2&nbsp;&nbsp;&nbsp; TLD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp; 000_00001_&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2&nbsp;&nbsp;&nbsp;&nbsp; 08/18/2010 17:19&nbsp;&nbsp;&nbsp;&nbsp; --- ---&nbsp;&nbsp; Scratch
A00002&nbsp; HCART2&nbsp;&nbsp;&nbsp; TLD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 3&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp; 000_00001_&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2&nbsp;&nbsp;&nbsp;&nbsp; 08/23/2010 10:56&nbsp; 08/18/2010 17:10&nbsp; NetBackup&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;
A00003&nbsp; HCART2&nbsp;&nbsp;&nbsp; TLD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 4&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp; 000_00001_&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp; 08/18/2010 17:07&nbsp;&nbsp;&nbsp;&nbsp; --- ---&nbsp;&nbsp; Scratch
A00004&nbsp; HCART2&nbsp;&nbsp;&nbsp; TLD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 5&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp; 000_00001_&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp;&nbsp; 08/18/2010 17:09&nbsp;&nbsp;&nbsp;&nbsp; --- ---&nbsp;&nbsp; Scratch

Also double-check the pool that is specified in the policy - you either need tapes in Scratch or in the pool that is required by the policy.

If you have a Scratch pool, verify that the pool is marked as 'scratch'.

# vmpool -listscratch
Scratch Pools
=============
Scratch

bertin · Answer

Merci pour ton aide Marianne, pouiriez vous me donnez un exemple concret, un exemple à suivre pour configurer NetBackup pas-à-pas afin de pouvoir faire des sauvegardes et restaurations sur des bandes LTO3 dans une TS3100.Je suis sur windows serveur 2003&nbsp; R2&nbsp; 32bit .
je souhaite avoir une vue sur la configuration des media, volume pool, du robo etc. pour que ça marche.

marianne · Answer

S'il vous plaît utiliser Google pour traduire tout cela en français ....

Step 1: Confirm that Windows Device Manager sees robot (unknown Medium Changer is fine) as well as tape drives. I personally prefer Veritas/Symantec tape driver for 32bit Windows.

Step 2: Stop and disable Removable Storage Manager.

Step 3: Use Device Configuration Wizard to configure robot and tape drives. Wizard will also create Storage Unit.

Step 4: Use Media GUI to create volume pools, otherwise all tapes will go to NetBackup pool by default. (Read up in Admin Guide I about pools and also about Scratch pool.)&nbsp; Add Barcode Rule to add new tapes to Scratch pool if you want to use multiple pools &amp; Scratch (info also in Admin Guide I - chapter 9, Volume pool operations).

Step 5: Inventory robot (Info also in chapter 9, Adding volumes using a robot inventory update)

Step 6: Verify that all densities are correct as per my previous post - yours should all be hcart3.

Step 7: Select Storage Unit and Volume pool in backup policy.

Hope this helps!

bertin · Answer

Merci, mais j'ai du mal à télécharger Admin Guide! Je souhaiterai que vous detailliez l'etape 4&nbsp; svp.

Forum Discussion

NetBackup (erreur 96)

11 Replies

Related Content

Netbackup - erreur 13 et erreur 96

NetBackup error code 96

Netbackup status code 96

Status 96

netbackup - Status 96

Recent Discussions

command: bperror

MS-SharePoint policy restore error (2804) .

How to restore a backup

How to configure RBAC

10 years old netbackup appliance database service down, ssl certification out date