Forum Discussion

Aaron_W_'s avatar
Aaron_W_
Level 2
16 years ago

New Overland 2000 not being used.

I'm am new this and this has been dropped in my lap. We added another Neo 2000 LTO3 to our exsiting Neo 2000 with LTO2, along with a robot to handle tapes in between the two. In Netbackup the drive a...
7.1.x and Earlier
Backup and Recovery
NetBackup
  • Aaron_W_'s avatar
    Aaron_W_
    16 years ago

    Thanks Andy. After switching the LTO3s to HCART2, adding the additional drives to the max concurrent drives for backup along with a reboot it is now working... Stopping and starting the daemons was not enough apparently.

     

    Thanks again

     

    Thanks to all who replied.

Andy_Welburn's avatar
Andy_Welburn
Level 6
16 years ago

Wouldn't have thought it necessary to remove the STU for the HCART3/LTO3 drives - if you've changed the drives to HCART2 then there will be none available to use anyway. No harm either way.

 

You will need to increase the max concurrent drives. e.g. If you now have 4 drives & it's only set to 2 on the STU then it will only use 2.