New system storage
1- create new robot for this task then
when you configure storage device the robot will create automatically, you don't need to create manual
2- scan and see new vtl (tape drives ) at the side of netbakup
when you configure storage device the all tapes drives will discovery automatically.
3- create apool for tapes media
Under media and evice management -> media -> volume pool -> create a pool that you want
4- and creat storage unit
auto discovery, else you create a disk storage
5- then creat a ploicy to initiate backup test
//////////////////////
Man, before to config the device on netbackup master; you need to config the Zone, to have more explanation: the zone connect the HBA Port on master server or media server with a VTL FC port through FC switch and that like direct connection and after you create zone you can work on netbackup side and this easy if you compare with zoning.
