Forum Discussion

Deyaa's avatar
Deyaa
Level 4
10 years ago

oracle Solaris recover in Ldom

Hi all ;

we have SPARC T4-2 servers ,configured OVM for sparc on it . one control domain and 3 LDOMs and these LDOMS configured as media servers to backup directly to NAS Storage.

we have the below environment :

* Master server

            - Hostname: Netbackup-bck , Solaris 10

            - netbackup 7.6.1.1

* Media servers :

     1- control domain

            - hostname :control-domain-bck , solaris 11

     1- LDOM 1 " database server ":  

           - hostname :dbserver-bck, solaris 11

     2-  LDOM 2 "application server ] :

           - hostname : appserver-bck , solaris 10

      3- LDOM 2  " file server ":

            - hostname : fileserver-bck , solaris 10

refering to this article :https://support.symantec.com/en_US/article.TECH162994.html

All NetBackup components supported with Solaris 11 SPARC physical servers are supported in a Solaris 11 LDoms Control Domain and I/O Domain with the exception of Bare Metal Restore (server or client). Guest domain support is limited to standard client, database agents, master server and disk media server

BMR is not supported on LDOMs , so i backup the control domain and each ldom like normal os backup means backup " /  " .

the question here , if there is a failure in LDOM and need to recover the LDOM OS backup . how to restore it ??

does i need to install solaris again and netbackup agent and restore the backup to overwrite the existing files or what ??

please provide Step by Step how-to if possible to test the restore.

thanks

Deyaa 

7.6
Backing Up
Backup and Recovery
Basics
Best Practice
Installing
Integration
NetBackup
Solaris
Tip-How to
  • Jaime_Vazquez's avatar
    Jaime_Vazquez
    10 years ago

    Your statement about BMR and Solaris LDOMS is not totally correct.

     

    BMR supports guest OS instances on Solaris 10 LDOMS with UFS attached.

    Although not stated to be supported, at least one user on this forum has gotten BMR to work on Solaris 11 LDOMS, again with UFS attached.

    BMR works at the LDOM guest  domain level.

    See this:

    Statement of Support for NetBackup 7.x in a Virtual Environment (Virtualization Technologies)   
    http://www.symantec.com/docs/TECH127089
     

4 Replies

Sort By
  • Noor_Toorabally's avatar
    Noor_Toorabally
    Level 4
    10 years ago

    Hello,

     

    These are the steps I would suggest for solaris 10:

     

    1. Reinstall solaris 10 and netbackup client on a slice (or disk)

    2. Restore the / on a root disk (or a root slice) mounted as /a for example (exclude the /tmp while restoring).

     

    3. After the restore completed, the following solaris procedures need to be done:

    touch /a/etc/mnttab

    chmod 444 /a/etc/mnttab

    mv /a/etc/path_to_inst /a/etc/ORIGINAL-PATH-TO-INST

    rm /a/etc/path_to_inst*

    rm -rf /a/devices/*

    rm -rf /a/dev/*

    cd /devices; find . | cpio -pmd /a/devices

    cd /dev; find . | cpio -pmd /a/dev

     

    Install the bootblk on the new root:

    cd /a/usr/platform/`uname -i`/lib/fs/ufs

    /a/usr/sbin/installboot bootblk /dev/rdsk/rootdisk_dysx

     

     

    Adjust network interface parameters:
    echo hostname > /a/etc/hostname.interfacename

     

     

    Further adjustments required:

    mkdir /a/tmp; chmod 1777 /a/tmp

    bootadm update-archive -v -R /a

     

     

    Go to OBP to perform a reconfiguration boot on the restored root_disk (slice)

    init 0

    boot root_disk -ras

     

    Then reboot to multiusermode after the above reconfiguration boot.

     

    Gud Luck

     

     

  • Jaime_Vazquez's avatar
    Jaime_Vazquez
    Level 6
    10 years ago

    Your statement about BMR and Solaris LDOMS is not totally correct.

     

    BMR supports guest OS instances on Solaris 10 LDOMS with UFS attached.

    Although not stated to be supported, at least one user on this forum has gotten BMR to work on Solaris 11 LDOMS, again with UFS attached.

    BMR works at the LDOM guest  domain level.

    See this:

    Statement of Support for NetBackup 7.x in a Virtual Environment (Virtualization Technologies)   
    http://www.symantec.com/docs/TECH127089
     

  • Deyaa's avatar
    Deyaa
    Level 4
    10 years ago

    in my environment , both solaris 10 and solaris 11 use zfs for root pool . forget BMR now.

    i need to know how to restore solaris without using BMR , as i took backup of / file system and need to restore it in case there is a disaster.

     

    BR

    Deyaa 

  • jim_dalton's avatar
    jim_dalton
    Level 6
    10 years ago

    This is a good question, interested to know the answer. What do Oracle/sun advise?

    If you break it down, the safest route would be:

    -separate data , app from OS

    -backup data , app in an appropriate manner.

    -backup OS.

    This way at least you have your all important data, you just need to figure how to go from a freshly installed server to the server with your latest OS on it. Traditionally one could do this by running off an arbitrary OS either on part of the OS disk or from bootable media with netb client installed and then reinstalling the OS onto  another part of disk and then setting the boot disk to the restored slice but have yet to investigate this when root is zfs. I'm certain Oracle will have covered this.

    Jim