Forum Discussion

emdlove's avatar
emdlove
Level 4
7 years ago

SLP Nightmare - multiple versions of incomplete duplication

Hello All,    I had to replace some hardware in a tape drive (picker & drive).  The tape # changed from tld4 to tld3. Of course after the fact I'm getting errors (2001) because Version 8 of the SLP...
SLP
  • Sujay24's avatar
    Sujay24
    7 years ago

    You would need to run below commands:-

    Path is <install path>\netbackup\bin\admincmd or /usr/openv/netbackup/bin/admincmd:-

    nbstl QTS-ATL-7Year -modify_version -version 2 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

    nbstl QTS-ATL-7Year -modify_version -version 3 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

    nbstl QTS-ATL-7Year -modify_version -version 5 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

    Important for version 6 and 8 if you want to change or not:- Original Storage unit used for backup is LDATL00NASBAK02STU and for duplicate is lsatl00bakmed02-hcart2-robot-tld-2

    Below is the command if you want to move it to tld3 for version 6 and 8:-

    nbstl QTS-ATL-7Year -modify_version -version 6 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

    nbstl QTS-ATL-7Year -modify_version -version 7 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

    Then activate the SLP and monitor the jobs.

    To check the size of duplication pending you can run below command:-

    nbstlutil report

Sujay24's avatar
Sujay24
Level 4

You would need to run below commands:-

Path is <install path>\netbackup\bin\admincmd or /usr/openv/netbackup/bin/admincmd:-

nbstl QTS-ATL-7Year -modify_version -version 2 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

nbstl QTS-ATL-7Year -modify_version -version 3 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

nbstl QTS-ATL-7Year -modify_version -version 5 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

Important for version 6 and 8 if you want to change or not:- Original Storage unit used for backup is LDATL00NASBAK02STU and for duplicate is lsatl00bakmed02-hcart2-robot-tld-2

Below is the command if you want to move it to tld3 for version 6 and 8:-

nbstl QTS-ATL-7Year -modify_version -version 6 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

nbstl QTS-ATL-7Year -modify_version -version 7 -residence LDATL00NASBAK02STU,lsatl00bakmed02-hcart2-robot-tld-3

Then activate the SLP and monitor the jobs.

To check the size of duplication pending you can run below command:-

nbstlutil report

emdlove's avatar
emdlove
Level 4
7 years ago

That did it!!!  Thank you so much.  I really appreciate your assistance.