NDMP error 99
Hi, Since fewdays, I have some trouble on my NDMP backups. My backup selection is shared between many streams. All full backup are OK, but some of incr backup failswith status 99. Apparently, the level 0 dump is post-dated, and I have this error : "Aborting the incremental dump of level (1) because the snapshot specified for this backup is older than the one used in the previous dump." 14/02/2016 22:36:37 - connecting 14/02/2016 22:36:37 - connected; connect time: 00:00:00 14/02/2016 22:36:38 - mounting CAD126 14/02/2016 22:38:15 - Info bptm(pid=17364) media id CAD126 mounted on drive index 2, drivepath nrst1a, drivename HP.ULTRIUM5-SCSI.002, copy 1 14/02/2016 22:38:15 - mounted; mount time: 00:01:37 14/02/2016 22:38:20 - Info ndmpagent(pid=18976) bstou103: SCSI: TAPE READ: short read for nrst1a 14/02/2016 22:38:21 - positioning CAD126 to file 44 14/02/2016 22:39:35 - Info ndmpagent(pid=18976) bstou103: DUMP: creating "/vol/volpoles/../snapshot_ for_backup.3112" snapshot. 14/02/2016 22:39:35 - positioned CAD126; position time: 00:01:14 14/02/2016 22:39:35 - begin writing 14/02/2016 22:39:37 - Info ndmpagent(pid=18976) bstou103: DUMP: Using subtree dump 14/02/2016 22:39:51 - Info ndmpagent(pid=18976) bstou103: DUMP: Date of this level 1 dump snapshot: Sun Feb 14 22:40:46 2016. 14/02/2016 22:39:52 - Info ndmpagent(pid=18976) bstou103: DUMP: Date of last level 0 dump: Tue Jan 19 04:14:07 2038. 14/02/2016 22:39:52 - Error ndmpagent(pid=18976) bstou103: DUMP: Aborting the incremental dump of level (1) because the snapshot specified for this backup is older than the one used in the previous dump. 14/02/2016 22:39:52 - Error ndmpagent(pid=18976) bstou103: DUMP: Dump failed to initialize. 14/02/2016 22:39:53 - Error ndmpagent(pid=18976) bstou103: DUMP: DUMP IS ABORTED 14/02/2016 22:39:54 - Info ndmpagent(pid=18976) bstou103: DUMP: Deleting "/vol/volpoles/../snapshot_ for_backup.3112" snapshot. 14/02/2016 22:39:56 - Error ndmpagent(pid=18976) bstou103: DATA: Operation terminated: EVENT: INTERNAL ERROR (for /vol/volpoles/qtpoles/PRP/ SERIS) 14/02/2016 22:39:56 - Error ndmpagent(pid=18976) NDMP backup failed, path = /vol/volpoles/qtpoles/PRP/ SERIS 14/02/2016 22:39:57 - Error bptm(pid=17364) none of the NDMP backups for client bstou103 completed successfully 14/02/2016 22:40:23 - Info bptm(pid=17364) EXITING with status 99 <---------- 14/02/2016 22:40:24 - end writing; write time: 00:00:49 NDMP backup failure(99) Any idea ? My version is 7.5.0.4 Thanks !Solved4.6KViews0likes22Comments
tape drive shows active , but the ready column shows NO
This particular tape drive is not showing any drives loaded and the Ready column shows NO /vmdareq -display HP.ULTRIUM4-SCSI.003 - AVAILABLE bellows SCAN_HOST UP scooter UP fozzie UP HP.ULTRIUM4-SCSI.004 - AVAILABLE bellows SCAN_HOST UP scooter UP fozzie UP HP.ULTRIUM4-SCSI.005 - RESERVED on Mon Feb 29 06:07:54 2016 bellows UP scooter UP fozzie UP I dont know a thing about tape drives and all of the link in symantec/ veritas site point to old web pages that no longer work.Solved7KViews1like5CommentsBacking up big data through NDMP
Hi Guys, We have volume size of 42TB data to be backupwith local NDMP backup going to tape library, it is taking more than 20 days to complete, luckly we don't have much network issues. I was wondering if some one suggest me having succesful backup in minimum time? any other methods? Netbackup master: 7.1.0.3 Media: 7.1.0.3 Netapp filer: Ontap 8.1.2P2 I am taking backup using snapshot ex: /vol/TP_MYDOCS/.snapshot/weekly.0 We have snap mirror configured from Productionto DR filer and NDMP backups are being taken from DR filer. Please let me know if any aditional details. Thank you so much in advance. Sagar4.5KViews0likes31Commentsndmp_data_get_state_failed, status = 18 (NDMP_XDR_DECODE_ERR)
Dear NBU champions I am using NBU 7.5.0.5 on master server win 2k8 R2. NDMP client -- EMC ISILON backup selection in NDMP policy -- /XYZ (29GB) /abc(63GB) Iam facing problem only with /xyz as itscompletes only in 4th or 5th attampts (with below errors) & every time it writes 30% 40% data on tape , other stream completes with on issue. 1/4/2014 10:57:35 AM - positioned 0092L4; position time: 00:01:28 1/4/2014 10:57:35 AM - begin writing 1/4/2014 11:05:42 AM - Error ndmpagent(pid=2216) ndmp_data_get_state_failed, status = 18 (NDMP_XDR_DECODE_ERR) 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) connection 0x1400c50 ndmp_message_process_one_failed, status = NDMP_ILLEGAL_STATE_ERR 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) eof is set - connection 0x1400c50 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) NDMP backup failed, path = /ifs/data/proj/xyz 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) ndmp_data_get_state_failed, status = 12 (NDMP_EOF_ERR) 1/4/2014 11:06:47 AM - Info bptm(pid=10488) EXITING with status 99 <---------- 1/4/2014 11:06:47 AM - end writing; write time: 00:09:12 NDMP backup failure(99)Solved5KViews1like15Comments
NDMP restore is hung after reading one media.
Hi All, I am trying to restore a directory on NDMP to its original location. My restore actually requires 8 medias. Restore is going in hung state after reading backup image on one media. Nothing is happening after that. I was not able to find any errors in bptm and bprd as well. Below are job logs. 7/15/2016 5:29:38 AM - begin Restore 7/15/2016 5:29:48 AM - media BE1658 required 7/15/2016 5:29:48 AM - media BE1331 required 7/15/2016 5:29:48 AM - media BE1308 required 7/15/2016 5:29:48 AM - media BE1667 required 7/15/2016 5:29:48 AM - media BE1273 required 7/15/2016 5:29:48 AM - media BE1513 required 7/15/2016 5:29:48 AM - media BE1694 required 7/15/2016 5:29:48 AM - media BE1673 required 7/15/2016 5:29:48 AM - restoring image bbtflrbe802_1457446031 7/15/2016 5:29:51 AM - Info bpbrm(pid=18752) bbtflrbe802 is the host to restore to 7/15/2016 5:29:51 AM - Info bpbrm(pid=18752) reading file list from client 7/15/2016 5:29:51 AM - connecting 7/15/2016 5:29:51 AM - Info bpbrm(pid=18752) starting bptm 7/15/2016 5:29:52 AM - Info ndmpagent(pid=18576) Restore started 7/15/2016 5:29:52 AM - connected; connect time: 00:00:01 7/15/2016 5:29:53 AM - Info bptm(pid=18320) start 7/15/2016 5:29:53 AM - started process bptm (18320) 7/15/2016 5:29:53 AM - Info bpdm(pid=18320) reading backup image 7/15/2016 5:29:55 AM - Info bptm(pid=18320) Waiting for mount of media id BE1331 (copy 1) on server bbtsrvbrl5. 7/15/2016 5:29:55 AM - started process bptm (18320) 7/15/2016 5:29:55 AM - mounting BE1331 7/15/2016 5:29:55 AM - requesting resource BE1331 7/15/2016 5:29:55 AM - granted resource BE1331 7/15/2016 5:29:55 AM - granted resource HP.ULTRIUM3-SCSI.000 7/15/2016 5:29:56 AM - Info bptm(pid=18320) INF - Waiting for mount of media id BE1331 on server bbtsrvbrl5 for reading. 7/15/2016 5:30:49 AM - mounted; mount time: 00:00:54 7/15/2016 5:30:49 AM - Info bptm(pid=18320) BE1331 7/15/2016 5:30:50 AM - Info bptm(pid=18320) INF - Waiting for positioning of media id BE1331 on server bbtsrvbrl5 for reading. 7/15/2016 5:30:50 AM - positioning BE1331 to file 13 7/15/2016 5:31:08 AM - positioned BE1331; position time: 00:00:18 7/15/2016 5:31:09 AM - Info bptm(pid=18320) completed reading backup image 7/15/2016 5:31:09 AM - Info bptm(pid=18320) EXITING with status 0 <---------- There is no progression after this. Please suggest how I can proceed further.Solved2.2KViews0likes8Comments
NDMP Accelerator for NetApp backups
Hi My current environment: Master on: RHEL 6 NBU 7.7.2 Mediaserver: RHEL6 NBU: 7.7.2 Netapp: 8.2.4 P2 7-Mode From NBU 7.7.1 Veritas has released the accelerator feature for NDMP backups. However, in the process of utilizing it, i am getting confused as to how i should get the full potential of this feature. Currently we are taking backup of Netapp vfilers through a NDMP type policy, without utilizing SLP`s. See attached the attributes section of the policy. My question is, considering the method we are utilizing currently, i should just check the Use Accelerator checkbox on the policy attribute to start utilizing the Accelerator feature. But is it the best way to perform an NDMP backup, and utilizing the Accelerator feature? Should i rather use an approach where SLP`s are involved? If yes, how and why will this be a better approach? We are also in the process of purchasing new storage solution, DD or Netbackup appliances.Solved2.4KViews0likes9CommentsNDMP Snapshots not Getting Deleted
Team, NDMP backups are configured in our enivronment for Netapp Filers. Backup are running for all the volume except one volume in a NetApp Filer. Issue is "Backup is getting intitated, Snapshot is getting created Backup goes hung state for few hours and failing with 99 error code" Snapshot which was created on the filer was not cleared, Same thing repeated for 4 times & now on the filer we have 4 snapshots which were created and occupired almost 80 GB of disk space. Tried to delete them manually from filer level but not luck we couldnt able to clear that. Hope some one can provide me a solution for this issue. Lets me if you need any more ifnoirmation to understand the issue. ***************************************** Netbackup Version 7.5.0.7 OS Solaris 10 Filer Net App ********************************* Have a look at the attachment for the Backup logSolved3.1KViews1like6Comments
ANY MATERIALS FOR A FRESHER TO CRACK THE CERTIFICATION EXAM
Hi, i am fresher going to da certification on Netbackup tool. please give me any suggestions as : 1) which certification will help me a lot to work on Netbackup all kinds of services. 2) materials which can be helpful for cracking the exam other than the guides provided by the website. 3) what should i do to be more competent enough to handle all the situations in the environment while dealing with this tool. Regards, vinay saiSolved1.4KViews0likes2Comments
Status 2001 on a cluster server
Hi All, I am using win 2008 & 2012 servers and NBU 7.6.0.1 in a cluster server, I got the error 2001 which is nothing but NO DRIVES ARE AVAILABLE, but i have plenty of drives and all are working fine and it is a FULL backup. In my environment we are using all windows severs, No Unix Servers. Anyone please suggest me howto getrid of this issue. Thanks in Advance Pavan534Views0likes1Comment
Status 2001 on a cluster server
Hi All, I am using win 2008 & 2012 servers and NBU 7.6.0.1 in a cluster server, I got the error 2001 which is nothing but NO DRIVES ARE AVAILABLE, but i have plenty of drives and all are working fine and it is a FULL backup. In my environment we are using all windows severs, No Unix Servers. Anyone please suggest me howto getrid of this issue. Thanks in Advance Pavan