Symantec System Recovery 2013 causes the Exchange console to fail
When the services are enabled and running for symantec system recovery 2013, the Exchange 2010 console and powershell (on SBS 2011) no longer starts. it sticks at "initializing" and goes no further and throws no error. If i then try to stop the services for SSR2013 the service states "stopping" and the process tied to the service (SymTrackServicex64.exe) can't be ended manually, the only way out is to reboot the server. If I boot the server with the SSR 2013 services disabled, exchange works fine until I re enable them. Any help with this would be appreciated as I am unable to see anything similar when scouring the web! CraigSSR 2013 How to improve FTP off-site copy performance?
How can I improve off-site copy performance via FTP? Is there any "undocumented" tuning feature or is any RFE required to achive that? SSR 2013 Desktop Edition is running on Windows 7 and off-site copy is sent to a remote server via FTP. The hosts are connected through 10Gb ethernet. Transfer rate of FTP protocol between the host is 300MB/s or more. It is an actual rate when I tested to send SSR backup images to the remote server using a bundle ftp command of Windows 7. However, off-site copy performance is up to around 100MB/s under the same environment. The both hosts are not so busy. Almost 10% of network workload and 30% of disk I/O workload during the off-site copy. Much CPU/Memory resources are free. The admin guide never describes any feature or tunables to improve the FTP performance. I opened a Symantec case and asked about that. But the answer was "no such feature is available". I wonder if any "undocumented" feature or tunables are implemented on SSR 2013. Or performance improvement on FTP off-site copy will be provided by a patch or in the next release. Any advice or information?
SEP ccSvcHst runs with SSR vProSvc during backup and stalls backup (2% in 12 hrs)
Dell Presicsion 330 Wndows 7 workstation, 3 HD, with SSR 2011 (because of older CPU) and SEP 2013 client (unmanaged) installed. We have a long historyof successful SSR daily backups completing in < 1 hr. Yesterday ran SSR restore on C: Last night's scheduled backup started at midnight and was only at 1% after after 8 hrs. Tack Manager showed ccSvcHst repeatedly running after short bursts of vProSvc action, with each process having almost equal very high I/O count. vProSvc logged 44 min of CPU time, ccSvcHst 30 min of CPU time, at point of aborting backup. Something related to backup is invoking SEP. The result kills effective backup. I need, and apprecaiate, your wisdom about cause and fix.
How do I create a Custom Recovery Disk using the SSR 2013 Trial
I've just downloaded the SSR 2013 trial and want to create a bootable recovery disk. From what I can tell from the unavailable user guide and sparse help file, I need the to have a SSR disk or SSR recovery .iso in hand and neither was provided with the trial. Is there a way to proceed without them?