Abnormal Traffic from Replication destination
Hi All, In my environment, there is a pair of NBU5230 appliance (A & B) to have single direction replication (From A to B). It is very strange, there is a huge amount of traffic from B to A after the replication windows closed. That huge amount of traffic is fully utilization my MAN Link. Any body have idea?
How to configure flashbackup-windows policy
How to configure flashbackup-windows policy ? Master/Media : NBU Appliance version 2.7.1 NBU Client Agent : 7.7.1 Policy Type : FlashBackup-Windows Backup Selection : \\. D:\ after I configure this and click OK but have error :Snapshot could not be create with auto method." Error code 71: None of the files mentioned inthe file list exist or may not be accessible. Best Regards, damrongpol.s
Exchange backup takes too much time
Hi guys, I have a question... MyDAG enviroment is composed by three servers every node is a virtual server (VMWARE), but disks where databases (29 databases = 800 GB)are on LUMs. Netbackup enviroment:Master server is Windows 2012 and media server is 5230 appliance. Full backups are taking almost 12 hours!! Could anyone give me an idea to improve this!
Issues connecting to an appliance
Recently, I recieved an external drive from one of my remote sites with 5TB of data on it. I plugged it into one of my media servers and backed it up in NBU using msdp to another media/appliance server we will call it server 20. Now, I want to run a full backup from the external site but have NBU point to the data backed up from the external drive. I understand if I use the samededupe pool as the backup from the external drive I can edit the pd.conf file on the server I am trying to run the full backup on to point to the data on the media server so it doesnt backup data already present. However, when I try to use the same dedupe pool on media/appliance server 20 I get the status code 58. But I am able to telnet from the server to the appliance server all necessary ports are opened and if i change the storage policy there is no issue. How can I get this to work? Below is an error message. 2/23/2016 3:59:08 PM - Info bpbrm(pid=100194) connect failed STATUS (18) CONNECT_FAILED 2/23/2016 3:59:08 PM - Info bpbrm(pid=100194) status: FAILED, (42) CONNECT_REFUSED; system: (110) Connection timed out; FROM 10.1XX.XXX TO 10.1XX.XXXbpcd VIA pbx 2/23/2016 3:59:08 PM - Info bpbrm(pid=100194) status: FAILED, (42) CONNECT_REFUSED; system: (110) Connection timed out; FROM 10.1XX.XXXTO 10.1XX.XXX bpcd VIA vnetd 2/23/2016 3:59:08 PM - Info bpbrm(pid=100194) status: FAILED, (42) CONNECT_REFUSED; system: (110) Connection timed out; FROM 10.1XX.XXX TO 10.1XX.XXX bpcd
