Tag:"system recovery copy hard drive"

HELP!!! CANT RESTORE WINDOWS 7
Hallo. Experts, geeks, MVP’s,J I hope you people can help. We currently have a very big problem. Suddenly we cannot backup and restore any windows 7 pc. Our image is deployed with software central. It’s both x86 and x64 image. Our server that deployed the image is a Microsoft server 2012 . So our system partition is 350 mb and c drive the remaining space. There are non-backup programs that can restore it. We have used: Symantec v.11 /v. 13 Snapshot. Acronis. Hdclone We have tried all sorts of setting in bios and so on. The funny thing is that a windows xp is no problem. Even if we install a windows 7 by hand from a DVD. No problem. Our other department have build there image a bit different. There is no system partition. It’s all on the c drive. That is also working fine to restore. We even tried to build the BCD from scratch. With no luck. We have sent one of our pc’s to snapshot in Germany they also could not restore it. Our hardware is HP elitedesk from 8100 to the newest 800 g1 its business pc. So they have all got a tpm chip installed. So guys what could we have missed. What could possibly be the problem???
Solved
Allan_s_rensen
9 years ago Place System Recovery
3.1KViews
2likes
16Comments
Does More than one Techn work at Symantec?????
1. NO ONE IS ANSWERING THE PHONE ANYWHERE AT SYMANTEC 2. YOUR PHONE SYSTEM IS REPORTING 1 MIN THEN OVER AN HOUR 3. I WAS ON HOLD OVER TWO HOURS 4. I HAVE ANOTHER ISSUE WITH BACKUP EXEC 5. EVEN YOUR SYMANTEC OPERATORS CANT GET THROUGH TO SUPPORT 6. MY ONLINE SUPPORT IS IN AN ORIENTAL LANGUAGE 7. YOUR ONLINE CHAT SUPPORT DOESNT WORK. NOONE IS THERE EITHER I've been on hold all morning. Don't listen to "The Customer Hold the Longest. is X min. It goes up and down and noone ever answers.
dnoble
14 years ago Place General Veritas
2KViews
2likes
7Comments
SSR 2011 not showing failed or missed backups.
Hi, I'm using a SSR 2011 Management Solutions. Here i've setup 2 policy's and 1 filter, meaning that a client receives 2 Backup Jobs. Through the Management Agent the SSR 2011 on the client does receive its Jobs. Each Jobs has a different destination. When the first Job has been done succesfully but the second Job has failed. It reports to the home screen that the system has been fully backed up. The Jobs are running every week, but i found a Computer that had missed a job for half an year without reporting that it has missed a job. How do i change this that every missed or failed job is reported. With Kind regards and thanks in forward, Dennis Velthuis
Solved
Denus
12 years ago Place System Recovery
2KViews
0likes
31Comments
Easy: Restoring from a RAID 1 device
Hya folks! Setup: BackupExec 2012 running on SBS 2011. Storage device is a 1GB drive plugged into a Stardom with a secondary disk that we manually swap and take offsite every week (actually, a collection of four such drives that we swap in series). This gives us backups going back four weeks. We want to restore a mailbox from three weeks ago. I've pulled the oldest RAID 1 diskout of rotation, mounted it in a usb enclosure, and shared it over the network. I am, however, not very familiar with how Backup Exec's manages storage devices and I am having trouble creating a Restore job from this network disk. Can someone please walk me through the process to create a Restore job from a network share for an old backup set? Part of the problem may be that the disk has the same identity as the active storage drive. I tried adding the network share in storage via the menu: Storage | Configure Storage | Disk-Based Storage | Disk Storage | ... Error message: "The disk storage device [PrimaryStorageDiskName]was found at the specified path. It is already a device on [ServerName] and cannot be added as a shared device." I'm sure it's a relatively trivial process, and my inexperience is the only major barrier. Much thanks!
BCAAFC_IT
10 years ago Place Backup Exec
1.9KViews
1like
9Comments
backup Performence
how to improve backup performance(For example I am running a backup operation it is taking 10 hours (consider ) then I need it to finish it within 5 hours or below mean as early as possible is it possible or not if possible means how Give me an example )
Solved
reddybass
12 years ago Place NetBackup
1.9KViews
2likes
8Comments
Appliance 5230/Media server/BMR
Hi, i have configured appliance 5230 as a media server, I have check BMR admin guide that the BMR option can be enabled from GUI if the appliance configured as master server, what about if the appliance is configured as a media server? Thanks Thamer
Solved
thamerthamer
11 years ago Place NetBackup
1.8KViews
0likes
8Comments
archive bit
Is there any one knows whyarchive bit ? and who controlearchive bit ? how server find archive bit status?
reddybass
12 years ago Place NetBackup
1.7KViews
0likes
7Comments
Possible to reinstate DC after recovery if you didn't check off the option?
Hi, I had to recover my server from an unexpected rollback yesterday using Backup Exec System Recovery 8.0 to restore an image from earlier in the week (10/29). I didn't realize I needed to check off the Preserve domain trust token on destinationoption that perserves the Active Directory information when doing the restore and now I have a PDC that cannot communicate with any other computers on my network. (The network is only 1 PDC which is WIndows 2003 SBS and 5 Windows XP clients.) When running dcdiag, I am getting the following: C:\Documents and Settings\Administrator>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SERVER Starting test: Connectivity The host bd51ce3c-796b-4435-8cdf-df9b31afeb05._msdcs.coltsnecknursery.l ocal could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (bd51ce3c-796b-4435-8cdf-df9b31afeb05._msdcs.coltsnecknursery.local) couldn't be resolved, the server name (SERVER.coltsnecknursery.local) resolved to the IP address (192.168.2.5) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... SERVER failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SERVER Skipping all tests, because server SERVER is not responding to directory service requests Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : coltsnecknursery Starting test: CrossRefValidation ......................... coltsnecknursery passed test CrossRefValidati on Starting test: CheckSDRefDom ......................... coltsnecknursery passed test CheckSDRefDom Running enterprise tests on : coltsnecknursery.local Starting test: Intersite ......................... coltsnecknursery.local passed test Intersite Starting test: FsmoCheck ......................... coltsnecknursery.local passed test FsmoCheck Also, there are the following messages in the DNS log: Event Type: Error Event Source: DNS Event Category: None Event ID: 4000 Date: 11/3/2012 Time: 11:18:28 PM User: N/A Computer: SERVER Description: The DNS server was unable to open Active Directory. This DNS server is configured to obtain and use information from the directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and reload the zone. The event data is the error code. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 2d 23 00 00 -#.. Is there a way to fix this problem after the fact without resinstalling the OS, rebuilding the network, and then restoring the system checking off the option to preserve the new network information? Thanks. Keith
Solved
tafcoi
12 years ago Place System Recovery
1.7KViews
0likes
8Comments
SLP
What is SLP? why SLP? what are the disadvantages and advantages of SLP? is there is any alternative is there for slp? what is deduplication can u give an example for deduplication?
Solved
reddybass
12 years ago Place NetBackup
1.6KViews
0likes
5Comments
First Backup image to external HDD getting Error ED800012 SSR 2013
Hello All i have a problem with one home user using SSR 2013.We have a policy for home users to execute a backup job at 12:45 each day to an external HDD. it works fine except for one user that is getting the bellow error each time. Error EC8F17B7: Cannot create recovery points for job: LOCAL USB. Error ED800012: The internal structure of the recovery point file (CRC Validation) is invalid, damaged or unsupported. any ideas?
x3d0sx
10 years ago Place System Recovery
1.4KViews
0likes
9Comments