Forum Discussion

mesaeqp's avatar
mesaeqp
Level 2
8 years ago

"Configure Disk Storage" job never finishes

I'm installing brand new licenses of Backup Exec 16 onto two different physical servers. On both installs, I try to configure disk storage (Western Digital MyBook, 8 TB) but the job never completes. ...
  • pkh's avatar
    pkh
    8 years ago

    When a disk fails the B2DTest, it cannot be used for disk storage.

    You can try formatting the disk to NTFS and try the B2DTest again.  If it fails again, then there is nothing much that you can do to get it accepted as a disk storage.

    Use a disk which is listed in the HCL instead.

Larry_Fine's avatar
Larry_Fine
Level 6

It should be easy :)

Have you tried configuring temporary/test storage on an internal disk?  Maybe there is some weird USB issue.

I would suggest running B2Dtest.  See http://www.veritas.com/docs/000037869 and/or the BE HCL www.backupexec.com/compatibility

Make sure there are no hidden alerts in BE that need to be acknowledged.

Have you tried rebooting the server and/or restarting the BE services?

mesaeqp's avatar
mesaeqp
Level 2
8 years ago

(I had a nice reply all typed out then lost it because the forum asked me to re-login. Arrg.)

Restarted, rebooted, sacrificed a lamb. Still no go.

I'm running B2Dtest on both servers now. Both aresitting at "B2D Allocation (pre v14)".

Server 1:
Windows Server 2012 R2
BE 16 64-bit
Disk Storage: Western Digital MyBook, 8 TB, USB, exFAT
Alert Log: empty
Haven't tried a different internal drive. This server only has one logical volume for Windows to see. I'm not sure if I should try using it as Disk Storage.

Server 2:

Windows Server 2008 R2
BE 16 64-bit
Disk Storage: Western Digital MyBook, 8 TB, USB, exFAT
Alert Log: One error about the disk controller for the MyBook. But, the MyBook is currently being used as the backup destination for my previous backup software. It seems to work fine.
Haven't tried configuring an internal drive as Disk Storage. The previous Configure Disk Storage job and B2Dtest are still running. I'm going to wait a day or so to see what happens with those.

This is very frustrating.

  • pkh's avatar
    pkh
    Moderator
    8 years ago

    When a disk fails the B2DTest, it cannot be used for disk storage.

    You can try formatting the disk to NTFS and try the B2DTest again.  If it fails again, then there is nothing much that you can do to get it accepted as a disk storage.

    Use a disk which is listed in the HCL instead.

    • mesaeqp's avatar
      mesaeqp
      Level 2
      8 years ago

      NTFS. I'll try that. Thanks.

      I guess I was being nieve in believing this statment in the HCL "any device recognized and supported by the Windows platform should work with Backup Exec."

      What USB devices are others using for disk targets?

      • pkh's avatar
        pkh
        Moderator
        8 years ago

        "Should" does not imply "must"