Forum Discussion

Abhijit_Soman's avatar
Abhijit_Soman
Level 6
13 years ago

Domino Journal Archiving Issue

Hi, I am using EV 9.0.3 installed on Win2K8 R2 Ent edition. This server is configured as EVDG server. I am able to archive / restore mails of end user however I am unable to archive domino journa...
Enterprise Vault
Error messages
Information Governance
Integration
Patch
Troubleshooting
  • AndrewB's avatar
    AndrewB
    13 years ago

    Maybe you have the task in report mode for the dtrace but make sure to take it out when you're ready to test again. This is from page 89-90 of the Registry_Values.pdf.

    NotesDomains
    HKEY_LOCAL_MACHINE
    \SOFTWARE
    \Wow6432Node
    \KVS
    \Enterprise Vault
    \Agents
    Location
    Content KEY
    You can specify that Enterprise Vault must perform a local address
    lookup for specific Notes domains. The local lookup enables Enterprise
    Vault to identify the Lotus Notes user name for those messages that
    are addressed to alternative email addresses. The local lookup results
    can aid searching in the Web applications and in Compliance
    Accelerator and Discovery Accelerator.
    Description
    To specify local lookup domains
    1 On an Enterprise Vault server that runs a Domino archiving or
    journaling task, create a new registry key called NotesDomains.
    2 Under the new NotesDomains key, create a subkey for each Notes
    domain. For example, if you have Notes domains
    'MyNotesDomain1' and 'MyNotesDomain2' you create subkeys
    'MyNotesDomain1' and 'MyNotesDomain2'.
    3 Under each of the Notes domain subkeys, create a new String
    value called InternalSMTPDomains.
    4 Assign to each InternalSMTPDomains value a string that lists
    the domains for which you want to use local lookup. Use
    semi-colons (;) to separate domains. For example:
    exampledomain1.com;exampledomain2.com
    5 Under each of the Notes domain subkeys, create a new DWORD
    value called EnableLocalPartLookup.
    6 Give EnableLocalPartLookup one of the following values:
    ■ 0 to disable local part lookup
    ■ 1 to enable local part lookup
    7 Repeat all these steps for any other Enterprise Vault servers that
    run Domino archiving or journaling tasks.
    Agents 89
    NotesDomains
    The Enterprise Vault behavior is as follows:
    ■ If the NotesDomains key is not present Enterprise Vault performs
    a full address lookup and places a warning in the event log.
    ■ If the NotesDomain key is present but has no key for the current
    Notes domain, Enterprise Vault records the original address and
    performs a full address lookup.
    ■ If the NotesDomain key is present and has a key for the current
    Notes domain, Enterprise Vault does the following:
    ■ If EnableLocalPartLookup is set to 0, performs a full address
    lookup.
    ■ If EnableLocalPartLookup is set to 1, performs a full address
    and local part lookup for those addresses that match the
    domain.
    If the InternalSMTPDomains list is present and the SMTP domain
    matches a domain in the list, SMTP messages being archived from
    journals are checked with full address and local part lookup.
    If the InternalSMTPDomains list is not present or there is no match,
    Enterprise Vault performs a full address lookup.

AndrewB's avatar
AndrewB
Moderator
13 years ago

Maybe you have the task in report mode for the dtrace but make sure to take it out when you're ready to test again. This is from page 89-90 of the Registry_Values.pdf.

NotesDomains
HKEY_LOCAL_MACHINE
\SOFTWARE
\Wow6432Node
\KVS
\Enterprise Vault
\Agents
Location
Content KEY
You can specify that Enterprise Vault must perform a local address
lookup for specific Notes domains. The local lookup enables Enterprise
Vault to identify the Lotus Notes user name for those messages that
are addressed to alternative email addresses. The local lookup results
can aid searching in the Web applications and in Compliance
Accelerator and Discovery Accelerator.
Description
To specify local lookup domains
1 On an Enterprise Vault server that runs a Domino archiving or
journaling task, create a new registry key called NotesDomains.
2 Under the new NotesDomains key, create a subkey for each Notes
domain. For example, if you have Notes domains
'MyNotesDomain1' and 'MyNotesDomain2' you create subkeys
'MyNotesDomain1' and 'MyNotesDomain2'.
3 Under each of the Notes domain subkeys, create a new String
value called InternalSMTPDomains.
4 Assign to each InternalSMTPDomains value a string that lists
the domains for which you want to use local lookup. Use
semi-colons (;) to separate domains. For example:
exampledomain1.com;exampledomain2.com
5 Under each of the Notes domain subkeys, create a new DWORD
value called EnableLocalPartLookup.
6 Give EnableLocalPartLookup one of the following values:
■ 0 to disable local part lookup
■ 1 to enable local part lookup
7 Repeat all these steps for any other Enterprise Vault servers that
run Domino archiving or journaling tasks.
Agents 89
NotesDomains
The Enterprise Vault behavior is as follows:
■ If the NotesDomains key is not present Enterprise Vault performs
a full address lookup and places a warning in the event log.
■ If the NotesDomain key is present but has no key for the current
Notes domain, Enterprise Vault records the original address and
performs a full address lookup.
■ If the NotesDomain key is present and has a key for the current
Notes domain, Enterprise Vault does the following:
■ If EnableLocalPartLookup is set to 0, performs a full address
lookup.
■ If EnableLocalPartLookup is set to 1, performs a full address
and local part lookup for those addresses that match the
domain.
If the InternalSMTPDomains list is present and the SMTP domain
matches a domain in the list, SMTP messages being archived from
journals are checked with full address and local part lookup.
If the InternalSMTPDomains list is not present or there is no match,
Enterprise Vault performs a full address lookup.