How to change ip address of eth0 of NBU 5230 appliance
Hi, we are setting up one NBU 5230 appliance (2.5.4) for a customer. The customer requires to change the ip address of eth0 so they can manage the appliance remotely. My question is:
Is it possible...
eth0 is the default management address - it should be kept as the management port and not part of the normal teams for netbackup use
To change it just do it from the CLISH as you would any other port as shown below where you use IP address, subnet, gateway, eth port
Network - Configure 10.10.10.22 255.255.255.0 10.10.10.1 eth0
Hope this helps
